Product Information

121-□-20G Types (Clutches and brakes)

121-□-20G Types (Clutches and brakes)

ダウンロード

121-□-20G Types (Clutches and brakes) Specifications

121-□-20G Types

[Specifications]

ModelSizeDynamic friction torque Td [N・m]Static friction torque Ts [N・m]Coil (at 20℃)Heat resistance classMax. rotation speed [min-1Rotating part moment of inertia J [kg・m2Total work performed until readjustment of the air gap ET [J]Armature pull-in time ta [s]Torque build-up time tp [s]Torque decaying time td [s]Mass [kg]
Voltage [V]Wattage [W]Current [A]Resistance [Ω]
121-06-20G0655.524 DC110.4652B30001.43×10-436×106C: 0.020/B: 0.015C: 0.041/B: 0.033C: 0.020/B: 0.0151.5
121-08-20G08101124 DC150.6338B30004.23×10-460×106C: 0.023/B: 0.016C: 0.051/B: 0.042C: 0.030/B: 0.0252.7
121-10-20G10202224 DC200.8329B30001.42×10-3130×106C: 0.025/B: 0.018C: 0.063/B: 0.056C: 0.050/B: 0.0305.5
121-12-20G12404524 DC251.0923B30004.18×10-3250×106C: 0.040/B: 0.027C: 0.115/B: 0.090C: 0.065/B: 0.0509.6
121-16-20G16809024 DC351.4616B30001.34×10-2470×106C: 0.050/B: 0.035C: 0.160/B: 0.127C: 0.085/B: 0.05518.5
121-20-20G2016017524 DC451.8813B25004.13×10-210×108C: 0.090/B: 0.065C: 0.250/B: 0.200C: 0.130/B: 0.07035
121-25-20G2532035024 DC602.509.6B20001.02×10-120×108C: 0.115/B: 0.085C: 0.335/B: 0.275C: 0.210/B: 0.12564

*The dynamic friction torque, Td, is measured at a relative speed of 100 min-1.

[Dimensions]

Unit [mm]
SizeDimensions of partDimensions of shaft
A1A2B1B2CDEFGHJ1J2KLMNZ1Z2Q1Q2S1S2U1U2V1V2X1X2W1, 2
652.5758090558027.5532.69565.540.5105.5181473313.56.52520113812.539.5M4×0.7, length: 83-M4×0.7, length: 43-120°60°4
86590901056510027.5612.611578.548.5126.5217573713.56.5302514451647M4×0.7, length: 83-M4×0.7, length: 63-120°60°5
10801101101308012532.5723.2142.59862154270724715.59403019552157M6×1, length: 114-M4×0.7, length: 84-90°45°5
121051351401609015035813.216512173.518433092522011.5504024642767M6×1, length: 114-M4×0.7, length: 84-90°45°7
1613516017518511219043974.5207149902213991136224.511.5605028753178M6×1, length: 116-M5×0.8, length: 86-60°30°7
2015520020023013223045109624718711727650414274.528148060389041.593.5M10×1.5, length: 174-M6×1, length: 124-90°45°10
2519524024027016029047.512420305238154334632183101.52814110704211545.5118.5M10×1.5, length: 178-M6×1, length: 128-45°22.5°12

*The input/output shaft keyways are old JIS standard class 2 while the key is old JIS standard class 1. Note that the keyway dimensions of the unit hub part do not conform to the old JIS standard. Check them on the dimensions table above.

*When inserting pulleys or the like onto input/output shafts, use the supplied insertion set.

*The 121-25-20G base is a casting.

Related Product