Product Information

122 Models (Double clutches/brakes)

122 Models (Double clutches/brakes)

ダウンロード

122 Models (Double clutches/brakes) Specifications

122 Models

[Specifications]

ModelSizeDynamic friction torque Td [N・m]Static friction torque Ts [N・m]Coil (at 20℃)Heat resistance classMax. rotation speed [min-1Rotating part moment of inertia J [kg・m2Total work performed until readjustment of the air gap ET [J]Armature pull-in time ta [s]Torque build-up time tp [s]Torque decaying time td [s]Mass [kg]
Voltage [V]Wattage [W]Current [A]Resistance [Ω]
122-06-20G0655.5DC24110.4652B30002.19×10-436×106C: 0.020/B: 0.015C: 0.041/B: 0.033C: 0.020/B: 0.0154
122-08-20G081011DC24150.6338B30006.55×10-460×106C: 0.023/B: 0.016C: 0.051/B: 0.042C: 0.030/B: 0.0256
122-10-20G102022DC24200.8329B30002.12×10-3130×106C: 0.025/B: 0.018C:0.063 / B:0.056C: 0.050/B: 0.0309
122-12-20G124045DC24251.0923B30006.35×10-3250×106C: 0.040/B: 0.027C: 0.115/B: 0.090C: 0.065/B: 0.05017
122-16-20G168090DC24351.4616B30001.99×10-2470×106C: 0.050/B: 0.035C: 0.160/B: 0.127C: 0.085/B: 0.05529
122-20-20G20160175DC24451.8813B25006.15×10-210×108C: 0.090/B: 0.065C: 0.250/B: 0.200C: 0.130/B: 0.07058

*The dynamic friction torque, Td, is measured at a relative speed of 100 min-1.

[Dimensions]

SizeDimensions of part
A1A2B1B2CDEFGHJ1J2KLMNZ1Z2
066590901056510027.5612.61157348142211473313.56.5
08801101101308012532.5723.2142.58353162246573715.59
101051351401609015035813.21651005919029472472011.5
1213516017518511219042.5974.520712474222358935224.511.5
16155200200230132230451096247150.589.5272440114.5622814
2019524024027016029047.51242030519711434855114374.52814
SizeDimensions of shaft
Q1Q2S1S2U1U2V1V2X1X2W1, 2
062520113812.539.5M4×0.7, length: 83-M4×0.7, length: 43° to 120°60°4
08302514451647M4×0.7, length: 83-M4×0.7, length: 63° to 120°60°5
10403019552157M6×1, length: 114-M4×0.7, length: 84° to 90°45°5
12504024642767M6×1, length: 114-M4×0.7, length: 84° to 90°45°7
16605028753178M6×1, length: 116-M5×0.8, length: 86° to 60°30°7
208060389041.593.5M10×1.5, length: 174-M6×1, length: 124° to 90°45°10

*The output keyways are old JIS standard class 2 while the key is old JIS standard class 1. Note that the keyway dimensions of the unit hub part do not conform to the old JIS standard. Check them on the dimensions table above.

*When inserting pulleys or the like onto output shafts, use the supplied insertion set.

*The 122-20-20G base is a casting.

Related Product