Product Information

CM Models Specifications

CM Models,*Made to order

[Specifications]

ModelShore hardness
50SH Torque
Shore
hardness
50SH
Dynamic
torsional
stiffness
[N・m/rad]
Shore hardness
60SH Torque
Shore
hardness
60SH
Dynamic
torsional
stiffness
[N・m/rad]
MisalignmentMax.
rotation
speed
[min-1]
Compatible
flange
size
SAE J620
Price
by
pilot bore
range
[yen]
Nominal
[N・m]
Max.
[N・m]
Continuous
vibration
torque
[N・m/10Hz]
Nominal
[N・m]
Max.
[N・m]
Continuous
vibration
torque
[N・m/10Hz]
Parallel
[mm]
Angular
[°]
CM-800-S170014002802.80×10385017003404.20×1030.50.5360010・11 1/2・14-
CM-1200-S1100020004004.50×103120024004807.00×1030.50.5350011 1/2・14-
CM-2400-S1200040008001.00×1042500500010001.50×1040.50.5300014・18-
CM-2800-S12800600011202.50×1043000750012003.75×1040.50.5300014・18-
CM-3000-S13000600012001.00×1043300700013001.51×1040.50.5300014・18-
CM-3500-S13200650012801.60×1043500800014002.40×1040.50.5300014・18-
CM-4000-S1----45001100018005.00×1040.50.5300014・18-
CM-5000-S14500900018001.70×10450001000020002.70×1040.50.5300014・18-
CM-7000-S163001260025202.85×10470001400028004.50×1040.50.5250018-
CM-8000-S1----90002200036008.00×1040.50.5250018・21・24-
CM-18000-S1160003200064001.15×105180003600072001.70×1050.50.5230021・24-

*Max. rotation speed is for the minimum flange size.This also does not take into account dynamic balance.

[Dimensions]

Unit [mm]
ModelCompatible flange size SAE J620ACd1D1ELL1NM
Pilot boreMax.
CM-800105082±218703161884661078-M10
111/23971±318703181884661078-M10
144674±618703181884661078-M10
CM-1200111/23965±418703181884661078-M10
144674±118703181884661078-M10
CM-240014・186197±62810541726106851508-M12
CM-280014・1861130±433110417761261001628-M16
CM-300014・1870135±819654655313510510012-M12
CM-350014・1870135±833110465591391001628-M16
CM-400014・1870161±6481404659415912521812-M16
CM-500014・1870147±2351104656415910516212-M16
CM-70001880159±9481405707616112521812-M16
CM-800018111197±56818060011019515024812-M20
2190197±56818058411019515024812-M20
2490197±56818058411019515024812-M20
CM-1800021156310±97018068017630620024824-M20
24137310±97018068017630620024824-M20
Unit [mm]
Nominal compatible flange size101114182124
Compatible flange size SAE J62010 111/214 18 21 24
DA314.3352.4466.7571.5673.1733.4
DT295.3333.4438.2542.9641.4692.2
Z8×45°8×45°8×45°6×60°12×30°12×30°
S111113171719

*The dimensions of the outer ring on the drive side are for mounting directly on an SAE J620 flywheel.

Related Product