日本語
English
Deutsch
中文
한국어
SPRFLEX
Simple construction sandwiches rubber buffer between two hubs
These couplings have simpler designs that sandwich a rubber buffer (nitrile rubber) between two hubs. The hub is lightweight, being made of aluminum alloy. The simple construction sandwiches a spider (rubber buffer) between hubs, so the coupling is easily mounted or removed by moving the device in the axial direction. Mounting on a shaft is easy. Simply hold a straight-edge to the hub periphery to center it.
- 製品一覧
These couplings have simpler designs that sandwich a rubber buffer (nitrile rubber) between two hubs. The hub is lightweight, being made of aluminum alloy.Mounting on a shaft is easy. Simply hold a straight-edge to the hub periphery to center it. One source of appeal is that its simple construction means lower cost.
- Max. nominal torque
50 N･m
- Pilot-bore additional processing range
4 mm to 48 mm
- Operating temperature
-20℃ to 80℃
