Product Information

P Models (single-type variable-pitch pulleys)

ダウンロード

P Models (single-type variable-pitch pulleys) Specifications

P Models

[Specifications]

ModelMotor used (4P)Gear ratioBelttransmission capacity[kW]Mass [kg]
High speedIntermediate speedLow speed
P-86-MA0.2~0.4 kW1:1.5A0.70.40.31.1
P-98-MA0.4~0.75 kW1:1.4A1.20.70.41.8
P-106-MA0.4~0.75 kW1:1.6B1.30.90.62.0
P-124-MA0.75~1.5 kW1:1.5B1.81.20.83.0
P-164-MA1.5~2.2 kW1:1.5C3.22.21.26.0
P-2182.2~3.7 kW1:1.4C6.24.43.214.0

[Driven Side Rotation Speed]

Unit [min-1]
Model4in.6in.8in.10in.12in.14in.16in.18in.
P-86-MA50Hz785~1180510~765375~560
60Hz945~1420610~920450~675
P-98-MA50Hz970~1365630~880460~650
60Hz1165~1645755~1060555~780
P-106-MA50Hz585~950425~690
60Hz705~1150510~830
P-124-MA50Hz760~1140560~840440~665
60Hz910~1370670~1010530~800
P-164-MA50Hz720~1120570~885475~735
60Hz865~1350685~1065570~885
P-21850Hz890~1205740~1000625~850545~740485~660
60Hz1070~1445890~1205750~1020655~890585~790

(Rotation speed by driven pulley diameter when mounted to a 4-pole motor) 50Hz,1430min-1 60Hz,1720min-1

[Dimensions]

Unit [mm]
ModelAP1P2LMDWUVMax. P.D.Min. P.D.Movement distance
P-86-MA861821.578631114----30775120
P-98-MA981922.585731419561621.540896221
P-106-MA106212696731419561621.540955829
P-124-MA12422271018419246821.527501137530
P-164-MA16425321301022428*882731501509642
P-218218273416313228288831316020415042

Movement distance refers to a distance to move the motor that is required to change speed. If a repeated load (brake, motor, etc.) is imposed, specify the key method.

** The bore of the P-164 for a 2.2 kW motor is a straight type.

For details on motor slide bases, refer to the Motor Slide Bases section.

[Aadapter]

ModelBore depth[mm]Supported shaft diameters (adapter bore) φD [mm]
1011121314151618192022242528
P-86-MA30
P-98-MA40
P-106-MA40
P-124-MA50
P-164-MA50
P-21860

*Bores marked with symbols above are available. ● , ◎ , and ○ indicate adapter type, and ▲ indicate straight type.

*Adapters indicated as ◎ do not have a keyway. Before using with a shaft having a key, first remove the key.

*○ indicates model that includes an L key, since adapter specifications prevent a parallel key from fitting. Use this L key when mounting.

*Bore diameters for the L key distinguish between the old JIS and new JIS codes. Specify when ordering.

Related Product