CF-X Models

ダウンロード

Features of CF-X Models

These models use high-quality nylon resin for the buffer material. This construction and element material mean they are rigid in the torsion direction, have excellent flexibility in the bending and axial direction, and have no backlash. They absorb vibration and shock while delivering accurate power transmission. These models have a simple construction comprised of element (buffer material), cylinder hub, flange hub, and a bolt for locking the element in place.

CF-X Models Specifications

CF-X (O0/O1/O2) Types

[Specifications]

Model	Torque		Misalignment			Max. rotation speed ［min^-1］	Static torsional stiffness ［N・m/rad］
Model	Nominal ［N・m］	Max. ［N・m］	Parallel ［mm］	Angular ［°］	Axial ［mm］	Max. rotation speed ［min^-1］	Static torsional stiffness ［N・m/rad］
CF-X-001	15	30	0.1	1	±0.5	10000	3.0×10³
CF-X-002	30	60	0.1	1	±0.5	10000	6.0×10³
CF-X-004	60	120	0.1	1	±0.5	8000	2.3×10⁴
CF-X-008	120	250	0.1	1	±0.5	7000	5.8×10⁴
CF-X-016	240	500	0.1	1	±0.5	6000	1.1×10⁵
CF-X-025	370	800	0.1	1	±0.5	5000	1.7×10⁵

Model	Moment of inertia ［kg・m²］	Mass ［kg］
CF-X-001-O0	2.03×10^-5	0.04
CF-X-002-O0	9.75×10^-5	0.1
CF-X-004-O0	2.30×10^-4	0.2
CF-X-008-O0	6.63×10^-4	0.3
CF-X-016-O0	1.56×10^-3	0.5
CF-X-025-O0	2.77×10^-3	0.6

Model	Moment of inertia ［kg・m²］	Mass ［kg］
CF-X-001-O1	5.25×10^-5	0.2
CF-X-002-O1	2.20×10^-4	0.4
CF-X-004-O1	4.83×10^-4	0.6
CF-X-008-O1	1.49×10^-3	1.3
CF-X-016-O1	3.49×10^-3	2.2
CF-X-025-O1	7.07×10^-3	3.5

Model	Moment of inertia ［kg・m²］	Mass ［kg］
CF-X-001-O2	1.22×10^-4	0.5
CF-X-002-O2	5.74×10^-4	0.9
CF-X-004-O2	1.19×10^-3	1.4
CF-X-008-O2	3.49×10^-3	2.9
CF-X-016-O2	9.20×10^-3	5
CF-X-025-O2	1.83×10^-2	7.9

*Max. rotation speed does not take into account dynamic balance.

*Static torsional stiff ness values given are from measurements taken at 20℃ .

*Values for moment of inertia and mass are those when the cylindrical hub and flange hub have pilot bores.

[Dimensions]

Unit ［mm］

Model	d1			d2			D1	D2	N1	N2	L1	L2	L3	A	B	C	E	G	S	S1	M1	M2	TK
Model	Pilot bore	Min.	Max.	Pilot bore	Min.	Max.	D1	D2	N1	N2	L1	L2	L3	A	B	C	E	G	S	S1	M1	M2	TK
CF-X-001	8	9	19	8	9	22	57	56	30	36	32	24	57	24	7	33	18	11	3	1	2-M6	2-M6	44
CF-X-002	10	11	26	9	10	30	88	85	40	45	30	28	62	24	8	34	20	10	4	4	2-M8	2-M8	68
CF-X-004	12	14	30	11	12	36	100	100	45	55	34	30	66.5	25	8	36.5	21	12	4	2.5	3-M8	3-M8	80
CF-X-008	12	14	38	15	16	46	125	120	60	70	40	42	85	30	10	43	26	14	4	3	3-M10	3-M10	100
CF-X-016	15	16	48	19	20	56	155	150	70	85	52	50	105	35	12	55	28	18	7	3	3-M12	3-M12	125
CF-X-025	15	16	55	19	20	65	175	170	85	100	58	56	117	40	14	61	34	20	6	3	3-M14	3-M14	140

*Pilot bores are to be drilled into the part. Minimum values for d1 and d2 are given by the minimum bore diameter values in the MIKI PULLEY standard hole-drilling standards and maximum values from the maximum allowable drilled bore diameters.

*The nominal diameters for bolts M1/M2 are equal to the quantity minus the nominal diameter of the screw threads.

*The TK dimension is the bolt mounting pitch diameter of the flange hub or paired mounting part.

[Standard bore diameter]

Model		Standard bore diameter ［mm］
Model		10	11	12	14	15	16	18	19	20	22	24	25	28	32	30	35	38
CF-X-001-O2-C	d1	●	●	●	●	●	●
CF-X-001-O2-C	d2	●	●	●	●	●	●	●	●
CF-X-002-O2-C	d1			●	●	●	●	●	●	●	●	●	●
CF-X-002-O2-C	d2			●	●	●	●	●	●	●	●	●	●
CF-X-004-O2-C	d1				●	●	●	●	●	●	●	●	●	●
CF-X-004-O2-C	d2				●	●	●	●	●	●	●	●	●	●	●	●	●	●

[Standard Hole-drilling Standards]

Unit ［mm］

Models compliant with the old JIS standard (class 2) JIS B 1301 1959					Models compliant with the new JIS standard (H9) JIS B 1301 1996					Models compliant with the motor standard JIS C 4210 2001
Nominal bore diameter	Bore diameter (d1, d2)	Keyway width (W1, W2)	Keyway height (T1, T2)	Set screw hole (M)	Nominal bore diameter	Bore diameter (d1, d2)	Keyway width (W1, W2)	Keyway height (T1, T2)	Set screw hole (M)	Nominal bore diameter	Bore diameter (d1, d2)	Keyway width (W1, W2)	Keyway height (T1, T2)	Set screw hole (M)
Nominal bore diameter	Tolerance H7, H8	Tolerance E9	-		Nominal bore diameter	Tolerance H7	Tolerance H9	-		Nominal bore diameter	Tolerance G7, F7	Tolerance H9	-
9	9^+0.022₀	-	-	2-M4	-	-	-	-	-	-	-	-	-	-
10	10^+0.022₀	-	-	2-M4	-	-	-	-	-	-	-	-	-	-
11	11^+0.018₀	-	-	2-M4	-	-	-	-	-	-	-	-	-	-
12	12^+0.018₀	4^+0.050_+0.020	13.5^+0.3₀	2-M4	12H	12^+0.018₀	4^+0.030₀	13.8^+0.3₀	2-M4	-	-	-	-	-
14	14^+0.018₀	5^+0.050_+0.020	16.0^+0.3₀	2-M4	14H	14^+0.018₀	5^+0.030₀	16.3^+0.3₀	2-M4	14N	14^+0.024_+0.006	5^+0.030₀	16.3^+0.3₀	2-M4
15	15^+0.018₀	5^+0.050_+0.020	17.0^+0.3₀	2-M4	15H	15^+0.018₀	5^+0.030₀	17.3^+0.3₀	2-M4	-	-	-	-	-
16	16^+0.018₀	5^+0.050_+0.020	18.0^+0.3₀	2-M4	16H	16^+0.018₀	5^+0.030₀	18.3^+0.3₀	2-M4	-	-	-	-	-
17	17^+0.018₀	5^+0.050_+0.020	19.0^+0.3₀	2-M4	17H	17^+0.018₀	5^+0.030₀	19.3^+0.3₀	2-M4	-	-	-	-	-
18	18^+0.018₀	5^+0.050_+0.020	20.0^+0.3₀	2-M4	18H	18^+0.018₀	6^+0.030₀	20.8^+0.3₀	2-M5	-	-	-	-	-
19	19^+0.021₀	5^+0.050_+0.020	21.0^+0.3₀	2-M4	19H	19^+0.021₀	6^+0.030₀	21.8^+0.3₀	2-M5	19N	19^+0.028_+0.007	6^+0.030₀	21.8^+0.3₀	2-M5
20	20^+0.021₀	5^+0.050_+0.020	22.0^+0.3₀	2-M4	20H	20^+0.021₀	6^+0.030₀	22.8^+0.3₀	2-M5	-	-	-	-	-
22	22^+0.021₀	7^+0.061_+0.025	25.0^+0.3₀	2-M6	22H	22^+0.021₀	6^+0.030₀	24.8^+0.3₀	2-M5	-	-	-	-	-
24	24^+0.021₀	7^+0.061_+0.025	27.0^+0.3₀	2-M6	24H	24^+0.021₀	8^+0.036₀	27.3^+0.3₀	2-M6	24N	24^+0.028_+0.007	8^+0.036₀	27.3^+0.3₀	2-M6
25	25^+0.021₀	7^+0.061_+0.025	28.0^+0.3₀	2-M6	25H	25^+0.021₀	8^+0.036₀	28.3^+0.3₀	2-M6	-	-	-	-	-
28	28^+0.021₀	7^+0.061_+0.025	31.0^+0.3₀	2-M6	28H	28^+0.021₀	8^+0.036₀	31.3^+0.3₀	2-M6	28N	28^+0.028_+0.007	8^+0.036₀	31.3^+0.3₀	2-M6
30	30^+0.021₀	7^+0.061_+0.025	33.0^+0.3₀	2-M6	30H	30^+0.021₀	8^+0.036₀	33.3^+0.3₀	2-M6	-	-	-	-	-
32	32^+0.025₀	10^+0.061_+0.025	35.5^+0.3₀	2-M8	32H	32^+0.025₀	10^+0.036₀	35.3^+0.3₀	2-M8	-	-	-	-	-
35	35^+0.025₀	10^+0.061_+0.025	38.5^+0.3₀	2-M8	35H	35^+0.025₀	10^+0.036₀	38.3^+0.3₀	2-M8	-	-	-	-	-
38	38^+0.025₀	10^+0.061_+0.025	41.5^+0.3₀	2-M8	38H	38^+0.025₀	10^+0.036₀	41.3^+0.3₀	2-M8	38N	38^+0.050_+0.025	10^+0.036₀	41.3^+0.3₀	2-M8
40	40^+0.025₀	10^+0.061_+0.025	43.5^+0.3₀	2-M8	40H	40^+0.025₀	12^+0.043₀	43.3^+0.3₀	2-M8	-	-	-	-	-
42	42^+0.025₀	12^+0.075_+0.032	45.5^+0.3₀	2-M8	42H	42^+0.025₀	12^+0.043₀	45.3^+0.3₀	2-M8	42N	42^+0.050_+0.025	12^+0.043₀	45.3^+0.3₀	2-M8
45	45^+0.025₀	12^+0.075_+0.032	48.5^+0.3₀	2-M8	45H	45^+0.025₀	14^+0.043₀	48.8^+0.3₀	2-M10	-	-	-	-	-
48	48^+0.025₀	12^+0.075_+0.032	51.5^+0.3₀	2-M8	48H	48^+0.025₀	14^+0.043₀	51.8^+0.3₀	2-M10	48N	48^+0.050_+0.025	14^+0.043₀	51.8^+0.3₀	2-M10
50	50^+0.025₀	12^+0.075_+0.032	53.5^+0.3₀	2-M8	50H	50^+0.025₀	14^+0.043₀	53.8^+0.3₀	2-M10	-	-	-	-	-
55	55^+0.030₀	15^+0.075_+0.032	60.0^+0.3₀	2-M10	55H	55^+0.030₀	16^+0.043₀	59.3^+0.3₀	2-M10	55N	55^+0.060_+0.030	16^+0.043₀	59.3^+0.3₀	2-M10
56	56^+0.030₀	15^+0.075_+0.032	61.0^+0.3₀	2-M10	56H	56^+0.030₀	16^+0.043₀	60.3^+0.3₀	2-M10	-	-	-	-	-
60	60^+0.030₀	15^+0.075_+0.032	65.0^+0.3₀	2-M10	60H	60^+0.030₀	18^+0.043₀	64.4^+0.3₀	2-M10	60N	60^+0.060_+0.030	18^+0.043₀	64.4^+0.3₀	2-M10
63	63^+0.030₀	18^+0.075_+0.032	69.0^+0.3₀	2-M10	18H	63^+0.030₀	18^+0.043₀	67.4^+0.3₀	2-M10	-	-	-	-	-
65	65^+0.030₀	18^+0.075_+0.032	71.0^+0.3₀	2-M10	65H	65^+0.030₀	18^+0.043₀	69.4^+0.3₀	2-M10	65N	65^+0.060_+0.030	18^+0.043₀	69.4^+0.3₀	2-M10

*All standards starting from ø11 are the same as those in the old JIS standards column.

*Positions of set screws and keyways are not on the same plane.

*Set screws are included with the product.

*Positioning precision for keyway milling is determined by sight.

*Contact Miki Pulley when the keyway requires a positioning precision for a particular flange hub.

*Consult the technical documentation at the end of this volume for standard dimensions for bore drilling other than those given here.

[Set screw position (Cylinder hub)]

Cylindrical hub model	Distance from edge［mm］
CF-X-001	6
CF-X-002	6
CF-X-004	6
CF-X-008	7
CF-X-016	10
CF-X-025	10

[Set screw position (Flange hub)]

Flange hub model	Distance from edge［mm］
CF-X-001	6
CF-X-002	7
CF-X-004	7
CF-X-008	9
CF-X-016	10
CF-X-025	10

CF-X (OG) Types

[Specifications]

Model	Torque		Misalignment			Max. rotation speed ［min^-1］	Static torsional stiffness ［N・m/rad］	Moment of inertia ［kg・m²］	Mass ［kg］
Model	Nominal ［N・m］	Max. ［N・m］	Parallel ［mm］	Angular ［°］	Axial ［mm］	Max. rotation speed ［min^-1］	Static torsional stiffness ［N・m/rad］	Moment of inertia ［kg・m²］	Mass ［kg］
CF-X-001-OG	15	30	8.2	1	±0.5	2000	1.15×10³	4.4×10^-4	1.2
CF-X-002-OG	30	60	8.2	1	±0.5	2000	2.40×10³	1.6×10^-3	2.2
CF-X-004-OG	60	120	8.2	1	±0.5	2000	6.97×10³	3.1×10^-3	3.1
CF-X-008-OG	120	250	8.1	1	±0.5	2000	1.75×10⁴	8.6×10^-3	5.8
CF-X-016-OG	240	500	7.9	1	±0.5	2000	3.15×10⁴	2.1×10^-3	9.6
CF-X-025-OG	370	800	7.8	1	±0.5	2000	5.76×10⁴	4.2×10^-2	14.6

*Max. rotation speed does not take into account dynamic balance.

*Static torsional stiffness values given are from measurements taken at 20℃ .

*Values for moment of inertia and mass are those when the flange hubs have pilot bores and L = 500 mm.

[Dimensions]

Unit ［mm］

Model	d2			D1	D2	N2	L2	A	B	E	G	S	S1	M1	M2	R	TK
Model	Pilot bore	Min.	Max.	D1	D2	N2	L2	A	B	E	G	S	S1	M1	M2	R	TK
CF-X-001-OG	8	9	22	57	56	36	24	24	7	18	11	3	1	2-M6	2-M6	30	44
CF-X-002-OG	9	10	30	88	85	45	28	24	8	20	10	4	4	2-M8	2-M8	40	68
CF-X-004-OG	11	12	36	100	100	55	30	25	8	21	12	4	2.5	3-M8	3-M8	45	80
CF-X-008-OG	15	16	46	125	120	70	42	30	10	26	14	4	3	3-M10	3-M10	60	100
CF-X-016-OG	19	20	56	155	150	85	50	35	12	28	18	7	3	3-M12	3-M12	70	125
CF-X-025-OG	19	20	65	175	170	100	56	40	14	34	20	6	3	3-M14	3-M14	85	140

*Pilot bores are to be drilled into the part. Minimum values for d2 are given by the minimum bore diameter values in the MIKI PULLEY standard hole-drilling standards and maximum values from the maximum allowable drilled bore diameters.

*The nominal diameters for bolts M1/M2 are equal to the quantity minus the nominal diameter of the screw threads, where the quantity is for one side.

*The L dimension has a standard length of 1000 mm or less. Dimension L must at least allow enough space for an M1 bolt to be mounted.

[Standard bore diameter]

Model		Standard bore diameter ［mm］
Model		10	11	12	14	15	16	18	19	20	22	24	25	28	32	30	35	38
CF-X-001-O2-C	d1	●	●	●	●	●	●
CF-X-001-O2-C	d2	●	●	●	●	●	●	●	●
CF-X-002-O2-C	d1			●	●	●	●	●	●	●	●	●	●
CF-X-002-O2-C	d2			●	●	●	●	●	●	●	●	●	●
CF-X-004-O2-C	d1				●	●	●	●	●	●	●	●	●	●
CF-X-004-O2-C	d2				●	●	●	●	●	●	●	●	●	●	●	●	●	●

[Standard Hole-drilling Standards]

Unit ［mm］

Models compliant with the old JIS standard (class 2) JIS B 1301 1959					Models compliant with the new JIS standard (H9) JIS B 1301 1996					Models compliant with the motor standard JIS C 4210 2001
Nominal bore diameter	Bore diameter (d1, d2)	Keyway width (W1, W2)	Keyway height (T1, T2)	Set screw hole (M)	Nominal bore diameter	Bore diameter (d1, d2)	Keyway width (W1, W2)	Keyway height (T1, T2)	Set screw hole (M)	Nominal bore diameter	Bore diameter (d1, d2)	Keyway width (W1, W2)	Keyway height (T1, T2)	Set screw hole (M)
Nominal bore diameter	Tolerance H7, H8	Tolerance E9	-		Nominal bore diameter	Tolerance H7	Tolerance H9	-		Nominal bore diameter	Tolerance G7, F7	Tolerance H9	-
9	9^+0.022₀	-	-	2-M4	-	-	-	-	-	-	-	-	-	-
10	10^+0.022₀	-	-	2-M4	-	-	-	-	-	-	-	-	-	-
11	11^+0.018₀	-	-	2-M4	-	-	-	-	-	-	-	-	-	-
12	12^+0.018₀	4^+0.050_+0.020	13.5^+0.3₀	2-M4	12H	12^+0.018₀	4^+0.030₀	13.8^+0.3₀	2-M4	-	-	-	-	-
14	14^+0.018₀	5^+0.050_+0.020	16.0^+0.3₀	2-M4	14H	14^+0.018₀	5^+0.030₀	16.3^+0.3₀	2-M4	14N	14^+0.024_+0.006	5^+0.030₀	16.3^+0.3₀	2-M4
15	15^+0.018₀	5^+0.050_+0.020	17.0^+0.3₀	2-M4	15H	15^+0.018₀	5^+0.030₀	17.3^+0.3₀	2-M4	-	-	-	-	-
16	16^+0.018₀	5^+0.050_+0.020	18.0^+0.3₀	2-M4	16H	16^+0.018₀	5^+0.030₀	18.3^+0.3₀	2-M4	-	-	-	-	-
17	17^+0.018₀	5^+0.050_+0.020	19.0^+0.3₀	2-M4	17H	17^+0.018₀	5^+0.030₀	19.3^+0.3₀	2-M4	-	-	-	-	-
18	18^+0.018₀	5^+0.050_+0.020	20.0^+0.3₀	2-M4	18H	18^+0.018₀	6^+0.030₀	20.8^+0.3₀	2-M5	-	-	-	-	-
19	19^+0.021₀	5^+0.050_+0.020	21.0^+0.3₀	2-M4	19H	19^+0.021₀	6^+0.030₀	21.8^+0.3₀	2-M5	19N	19^+0.028_+0.007	6^+0.030₀	21.8^+0.3₀	2-M5
20	20^+0.021₀	5^+0.050_+0.020	22.0^+0.3₀	2-M4	20H	20^+0.021₀	6^+0.030₀	22.8^+0.3₀	2-M5	-	-	-	-	-
22	22^+0.021₀	7^+0.061_+0.025	25.0^+0.3₀	2-M6	22H	22^+0.021₀	6^+0.030₀	24.8^+0.3₀	2-M5	-	-	-	-	-
24	24^+0.021₀	7^+0.061_+0.025	27.0^+0.3₀	2-M6	24H	24^+0.021₀	8^+0.036₀	27.3^+0.3₀	2-M6	24N	24^+0.028_+0.007	8^+0.036₀	27.3^+0.3₀	2-M6
25	25^+0.021₀	7^+0.061_+0.025	28.0^+0.3₀	2-M6	25H	25^+0.021₀	8^+0.036₀	28.3^+0.3₀	2-M6	-	-	-	-	-
28	28^+0.021₀	7^+0.061_+0.025	31.0^+0.3₀	2-M6	28H	28^+0.021₀	8^+0.036₀	31.3^+0.3₀	2-M6	28N	28^+0.028_+0.007	8^+0.036₀	31.3^+0.3₀	2-M6
30	30^+0.021₀	7^+0.061_+0.025	33.0^+0.3₀	2-M6	30H	30^+0.021₀	8^+0.036₀	33.3^+0.3₀	2-M6	-	-	-	-	-
32	32^+0.025₀	10^+0.061_+0.025	35.5^+0.3₀	2-M8	32H	32^+0.025₀	10^+0.036₀	35.3^+0.3₀	2-M8	-	-	-	-	-
35	35^+0.025₀	10^+0.061_+0.025	38.5^+0.3₀	2-M8	35H	35^+0.025₀	10^+0.036₀	38.3^+0.3₀	2-M8	-	-	-	-	-
38	38^+0.025₀	10^+0.061_+0.025	41.5^+0.3₀	2-M8	38H	38^+0.025₀	10^+0.036₀	41.3^+0.3₀	2-M8	38N	38^+0.050_+0.025	10^+0.036₀	41.3^+0.3₀	2-M8
40	40^+0.025₀	10^+0.061_+0.025	43.5^+0.3₀	2-M8	40H	40^+0.025₀	12^+0.043₀	43.3^+0.3₀	2-M8	-	-	-	-	-
42	42^+0.025₀	12^+0.075_+0.032	45.5^+0.3₀	2-M8	42H	42^+0.025₀	12^+0.043₀	45.3^+0.3₀	2-M8	42N	42^+0.050_+0.025	12^+0.043₀	45.3^+0.3₀	2-M8
45	45^+0.025₀	12^+0.075_+0.032	48.5^+0.3₀	2-M8	45H	45^+0.025₀	14^+0.043₀	48.8^+0.3₀	2-M10	-	-	-	-	-
48	48^+0.025₀	12^+0.075_+0.032	51.5^+0.3₀	2-M8	48H	48^+0.025₀	14^+0.043₀	51.8^+0.3₀	2-M10	48N	48^+0.050_+0.025	14^+0.043₀	51.8^+0.3₀	2-M10
50	50^+0.025₀	12^+0.075_+0.032	53.5^+0.3₀	2-M8	50H	50^+0.025₀	14^+0.043₀	53.8^+0.3₀	2-M10	-	-	-	-	-
55	55^+0.030₀	15^+0.075_+0.032	60.0^+0.3₀	2-M10	55H	55^+0.030₀	16^+0.043₀	59.3^+0.3₀	2-M10	55N	55^+0.060_+0.030	16^+0.043₀	59.3^+0.3₀	2-M10
56	56^+0.030₀	15^+0.075_+0.032	61.0^+0.3₀	2-M10	56H	56^+0.030₀	16^+0.043₀	60.3^+0.3₀	2-M10	-	-	-	-	-
60	60^+0.030₀	15^+0.075_+0.032	65.0^+0.3₀	2-M10	60H	60^+0.030₀	18^+0.043₀	64.4^+0.3₀	2-M10	60N	60^+0.060_+0.030	18^+0.043₀	64.4^+0.3₀	2-M10
63	63^+0.030₀	18^+0.075_+0.032	69.0^+0.3₀	2-M10	18H	63^+0.030₀	18^+0.043₀	67.4^+0.3₀	2-M10	-	-	-	-	-
65	65^+0.030₀	18^+0.075_+0.032	71.0^+0.3₀	2-M10	65H	65^+0.030₀	18^+0.043₀	69.4^+0.3₀	2-M10	65N	65^+0.060_+0.030	18^+0.043₀	69.4^+0.3₀	2-M10

*All standards starting from ø11 are the same as those in the old JIS standards column.

*Positions of set screws and keyways are not on the same plane.

*Set screws are included with the product.

*Positioning precision for keyway milling is determined by sight.

*Contact Miki Pulley when the keyway requires a positioning precision for a particular flange hub.

*Consult the technical documentation at the end of this volume for standard dimensions for bore drilling other than those given here.

[Set screw position (Cylinder hub)]

Cylindrical hub model	Distance from edge［mm］
CF-X-001	6
CF-X-002	6
CF-X-004	6
CF-X-008	7
CF-X-016	10
CF-X-025	10

[Set screw position (Flange hub)]

Flange hub model	Distance from edge［mm］
CF-X-001	6
CF-X-002	7
CF-X-004	7
CF-X-008	9
CF-X-016	10
CF-X-025	10

CF-X (O2-C) Types,*Made to order

[Specifications]

Model	Torque		Misalignment			Max. rotation speed ［min^-1］	Static torsional stiffness ［N・m/rad］	Moment of inertia ［kg・m²］	Mass ［kg］
Model	Nominal ［N・m］	Max. ［N・m］	Parallel ［mm］	Angular ［°］	Axial ［mm］	Max. rotation speed ［min^-1］	Static torsional stiffness ［N・m/rad］	Moment of inertia ［kg・m²］	Mass ［kg］
CF-X-001-O2-C	15	30	0.1	1	±0.5	10000	3.0×10³	7.14×10^-5	0.2
CF-X-002-O2-C	30	60	0.1	1	±0.5	10000	6.0×10³	3.44×10^-4	0.5
CF-X-004-O2-C	60	120	0.1	1	±0.5	8000	2.3×10⁴	7.22×10^-4	0.7

*Max. rotation speed does not take into account dynamic balance.

*Static torsional stiffness values given are from measurements taken at 20℃ .

*Values for moment of inertia and mass are those when the cylindrical hub and flange hub have the minimum bore diameters.

[Dimensions]

Unit ［mm］

Model	d1		d2		D1	D2	N1	N2	N3	L1	L2	L3	A	B	E	G	S	S1	M1	M2	M3	TK
Model	Min.	Max.	Min.	Max.	D1	D2	N1	N2	N3	L1	L2	L3	A	B	E	G	S	S1	M1	M2	M3	TK
CF-X-001-O2-C	10	16	10	19	57	56	33	30	38	37	24	62	24	7	18	11	3	1	2-M6	2-M6	1-M5	44
CF-X-002-O2-C	12	25	12	25	88	85	46	40	46	43	28	75	24	8	20	10	4	4	2-M8	2-M8	1-M6	68
CF-X-004-O2-C	14	28	14	38	100	99	57	45	68	46.5	30	79	25	8	21	12	4	2.5	3-M8	3-M8	1-M8	80

*The nominal diameters for bolts M1, M2, and M3 are equal to the quantity minus the nominal diameter of the screw threads, where the quantity for clamping bolt M3 is for a hub on one side.

*The recommended processing tolerance for paired shafts is the h7 class.

[Standard bore diameter]

Model		Standard bore diameter ［mm］
Model		10	11	12	14	15	16	18	19	20	22	24	25	28	32	30	35	38
CF-X-001-O2-C	d1	●	●	●	●	●	●
CF-X-001-O2-C	d2	●	●	●	●	●	●	●	●
CF-X-002-O2-C	d1			●	●	●	●	●	●	●	●	●	●
CF-X-002-O2-C	d2			●	●	●	●	●	●	●	●	●	●
CF-X-004-O2-C	d1				●	●	●	●	●	●	●	●	●	●
CF-X-004-O2-C	d2				●	●	●	●	●	●	●	●	●	●	●	●	●	●

[Standard Hole-drilling Standards]

Unit ［mm］

Models compliant with the old JIS standard (class 2) JIS B 1301 1959					Models compliant with the new JIS standard (H9) JIS B 1301 1996					Models compliant with the motor standard JIS C 4210 2001
Nominal bore diameter	Bore diameter (d1, d2)	Keyway width (W1, W2)	Keyway height (T1, T2)	Set screw hole (M)	Nominal bore diameter	Bore diameter (d1, d2)	Keyway width (W1, W2)	Keyway height (T1, T2)	Set screw hole (M)	Nominal bore diameter	Bore diameter (d1, d2)	Keyway width (W1, W2)	Keyway height (T1, T2)	Set screw hole (M)
Nominal bore diameter	Tolerance H7, H8	Tolerance E9	-		Nominal bore diameter	Tolerance H7	Tolerance H9	-		Nominal bore diameter	Tolerance G7, F7	Tolerance H9	-
9	9^+0.022₀	-	-	2-M4	-	-	-	-	-	-	-	-	-	-
10	10^+0.022₀	-	-	2-M4	-	-	-	-	-	-	-	-	-	-
11	11^+0.018₀	-	-	2-M4	-	-	-	-	-	-	-	-	-	-
12	12^+0.018₀	4^+0.050_+0.020	13.5^+0.3₀	2-M4	12H	12^+0.018₀	4^+0.030₀	13.8^+0.3₀	2-M4	-	-	-	-	-
14	14^+0.018₀	5^+0.050_+0.020	16.0^+0.3₀	2-M4	14H	14^+0.018₀	5^+0.030₀	16.3^+0.3₀	2-M4	14N	14^+0.024_+0.006	5^+0.030₀	16.3^+0.3₀	2-M4
15	15^+0.018₀	5^+0.050_+0.020	17.0^+0.3₀	2-M4	15H	15^+0.018₀	5^+0.030₀	17.3^+0.3₀	2-M4	-	-	-	-	-
16	16^+0.018₀	5^+0.050_+0.020	18.0^+0.3₀	2-M4	16H	16^+0.018₀	5^+0.030₀	18.3^+0.3₀	2-M4	-	-	-	-	-
17	17^+0.018₀	5^+0.050_+0.020	19.0^+0.3₀	2-M4	17H	17^+0.018₀	5^+0.030₀	19.3^+0.3₀	2-M4	-	-	-	-	-
18	18^+0.018₀	5^+0.050_+0.020	20.0^+0.3₀	2-M4	18H	18^+0.018₀	6^+0.030₀	20.8^+0.3₀	2-M5	-	-	-	-	-
19	19^+0.021₀	5^+0.050_+0.020	21.0^+0.3₀	2-M4	19H	19^+0.021₀	6^+0.030₀	21.8^+0.3₀	2-M5	19N	19^+0.028_+0.007	6^+0.030₀	21.8^+0.3₀	2-M5
20	20^+0.021₀	5^+0.050_+0.020	22.0^+0.3₀	2-M4	20H	20^+0.021₀	6^+0.030₀	22.8^+0.3₀	2-M5	-	-	-	-	-
22	22^+0.021₀	7^+0.061_+0.025	25.0^+0.3₀	2-M6	22H	22^+0.021₀	6^+0.030₀	24.8^+0.3₀	2-M5	-	-	-	-	-
24	24^+0.021₀	7^+0.061_+0.025	27.0^+0.3₀	2-M6	24H	24^+0.021₀	8^+0.036₀	27.3^+0.3₀	2-M6	24N	24^+0.028_+0.007	8^+0.036₀	27.3^+0.3₀	2-M6
25	25^+0.021₀	7^+0.061_+0.025	28.0^+0.3₀	2-M6	25H	25^+0.021₀	8^+0.036₀	28.3^+0.3₀	2-M6	-	-	-	-	-
28	28^+0.021₀	7^+0.061_+0.025	31.0^+0.3₀	2-M6	28H	28^+0.021₀	8^+0.036₀	31.3^+0.3₀	2-M6	28N	28^+0.028_+0.007	8^+0.036₀	31.3^+0.3₀	2-M6
30	30^+0.021₀	7^+0.061_+0.025	33.0^+0.3₀	2-M6	30H	30^+0.021₀	8^+0.036₀	33.3^+0.3₀	2-M6	-	-	-	-	-
32	32^+0.025₀	10^+0.061_+0.025	35.5^+0.3₀	2-M8	32H	32^+0.025₀	10^+0.036₀	35.3^+0.3₀	2-M8	-	-	-	-	-
35	35^+0.025₀	10^+0.061_+0.025	38.5^+0.3₀	2-M8	35H	35^+0.025₀	10^+0.036₀	38.3^+0.3₀	2-M8	-	-	-	-	-
38	38^+0.025₀	10^+0.061_+0.025	41.5^+0.3₀	2-M8	38H	38^+0.025₀	10^+0.036₀	41.3^+0.3₀	2-M8	38N	38^+0.050_+0.025	10^+0.036₀	41.3^+0.3₀	2-M8
40	40^+0.025₀	10^+0.061_+0.025	43.5^+0.3₀	2-M8	40H	40^+0.025₀	12^+0.043₀	43.3^+0.3₀	2-M8	-	-	-	-	-
42	42^+0.025₀	12^+0.075_+0.032	45.5^+0.3₀	2-M8	42H	42^+0.025₀	12^+0.043₀	45.3^+0.3₀	2-M8	42N	42^+0.050_+0.025	12^+0.043₀	45.3^+0.3₀	2-M8
45	45^+0.025₀	12^+0.075_+0.032	48.5^+0.3₀	2-M8	45H	45^+0.025₀	14^+0.043₀	48.8^+0.3₀	2-M10	-	-	-	-	-
48	48^+0.025₀	12^+0.075_+0.032	51.5^+0.3₀	2-M8	48H	48^+0.025₀	14^+0.043₀	51.8^+0.3₀	2-M10	48N	48^+0.050_+0.025	14^+0.043₀	51.8^+0.3₀	2-M10
50	50^+0.025₀	12^+0.075_+0.032	53.5^+0.3₀	2-M8	50H	50^+0.025₀	14^+0.043₀	53.8^+0.3₀	2-M10	-	-	-	-	-
55	55^+0.030₀	15^+0.075_+0.032	60.0^+0.3₀	2-M10	55H	55^+0.030₀	16^+0.043₀	59.3^+0.3₀	2-M10	55N	55^+0.060_+0.030	16^+0.043₀	59.3^+0.3₀	2-M10
56	56^+0.030₀	15^+0.075_+0.032	61.0^+0.3₀	2-M10	56H	56^+0.030₀	16^+0.043₀	60.3^+0.3₀	2-M10	-	-	-	-	-
60	60^+0.030₀	15^+0.075_+0.032	65.0^+0.3₀	2-M10	60H	60^+0.030₀	18^+0.043₀	64.4^+0.3₀	2-M10	60N	60^+0.060_+0.030	18^+0.043₀	64.4^+0.3₀	2-M10
63	63^+0.030₀	18^+0.075_+0.032	69.0^+0.3₀	2-M10	18H	63^+0.030₀	18^+0.043₀	67.4^+0.3₀	2-M10	-	-	-	-	-
65	65^+0.030₀	18^+0.075_+0.032	71.0^+0.3₀	2-M10	65H	65^+0.030₀	18^+0.043₀	69.4^+0.3₀	2-M10	65N	65^+0.060_+0.030	18^+0.043₀	69.4^+0.3₀	2-M10

*All standards starting from ø11 are the same as those in the old JIS standards column.

*Positions of set screws and keyways are not on the same plane.

*Set screws are included with the product.

*Positioning precision for keyway milling is determined by sight.

*Contact Miki Pulley when the keyway requires a positioning precision for a particular flange hub.

*Consult the technical documentation at the end of this volume for standard dimensions for bore drilling other than those given here.

[Set screw position (Cylinder hub)]

Cylindrical hub model	Distance from edge［mm］
CF-X-001	6
CF-X-002	6
CF-X-004	6
CF-X-008	7
CF-X-016	10
CF-X-025	10

[Set screw position (Flange hub)]

Flange hub model	Distance from edge［mm］
CF-X-001	6
CF-X-002	7
CF-X-004	7
CF-X-008	9
CF-X-016	10
CF-X-025	10

Related Product

Basic Specifications

Max. transmission torque 0.195N・m（Air gap 1mm）

Bore ranges 8mm～15mm

Basic Specifications

Max. nominal torque 7850 N･m

Max. speed 3000 min^-1

Operating temperature -10℃ to 60℃

Basic Specifications

Max. rated torque 490 N･m

Bore ranges 16 mm to 48 mm

Backlash Zero

Basic Specifications

Max. nominal torque 5 N･m

Bore ranges 3 mm to 20 mm

Operating temperature -30℃ to 100℃

CF-X Models

Features of CF-X Models

CF-X Models Specifications

Structure and Materials

Related Product