Product Information

Options of AHM Models

Control Function 01 (Standard Handle)

The handle can be attached in the vertical or horizontal directions.
In addition to the standard handle, there is also an optional SD model handle available that comes equipped with a built-in rotation speed indicator. (The handle can only actually be used when attached sideways.)

[Specifications/Dimensions]

Model A B P2 R Handle speed
AH-02 100 134 80 80 11
AH-04 110 144 92 80 13
AH-07 120 154 106 80 14
AH-15 140 174 121 80 15
AH-22 170 220 133 160 17
AH-37 170 220 133 160 17

Control Function 00 (No Handle Included)

Specify model 00 if detaching the standard handle and using a different handle instead or using remote control operation using a sprocket universal joint, etc.

[Specifications/Dimensions]

Model A B D1 D2 P2 Handle speed
AH-02 101 121 10 15 80 11
AH-04 111 131 10 15 92 13
AH-07 121 141 10 15 106 14
AH-15 141 161 10 16 121 15
AH-22 171 191 10 16 133 17
AH-37 171 191 10 16 133 17

Control Function 03 (Right-angle Handle)

This model uses a right-angle handle that attaches to a beveled gear in the handle section. This model also accepts the standard handle as well as an SD handle (handle equipped with a built-in rotation speed indicator).

[Specifications/Dimensions]

Model A B P2 C R Handle speed
AH-02 150 190 80 80 80 11
AH-04 160 200 92 80 80 13
AH-07 170 210 106 80 80 14
AH-15 190 230 121 80 80 15
AH-22 220 300 133 100 160 17
AH-37 220 300 133 100 160 17

Control Function 04 (Flexible Shaft-based Remote-controlled Operation)

The unit can be operated by remote control at low cost.
*There are three different lengths for standard flexible shafts, 1000 mm, 1600 mm, and 2500 mm.
*Set the radius of curvature to R300 or above.

[Specifications/Dimensions]

Model A B C D E F G L N R Z Handle speed RF model
AH-02 118 93 25 100 100 25 12 70 14 86 7 11 RF-03-A
AH-04 110 13
AH-07 121 120 18 160 14 RF-04-A
AH-15 140 15
AH-22 170 17
AH-37

Related Product