ETP-E Plus Models

ダウンロード

Features of ETP-E Plus Models

The axle and hub are connected by a single bolt, so installation can be done quickly and easily. Moreover, the concentricity is an excellent 0.02mm, so it is perfect for places where high precision is required and it will be frequently removed and installed. It is built to tighten radially, so it does not need a lot of space to operate.

Simple and accurate positioning

Freely positionable for different axial and rotation directions, so installation on equipment requiring accurate synchronized adjustments is simple.

Space saving

The axle is designed to be fastened radially, so a space saving layout is possible. We have produced a low inertia, compact, and light weight design.

High concentricity

The surface pressure on the axle and hub is uniform, so a high level of concentricity is preserved, even if the outer diameter of the hub is small. Therefore, even when used with high speed rotation, any unbalance due to centrifugal force is kept small.

Reliably speedy installation

It can be reliably installed just by tightening a single bolt with the prescribed amount of torque. (*To reliably attach the axle and hub with the proper surface pressure, make sure the axle and hub are in complete contact with each other.)

Safety guarantee in food processing and medical equipment

As safe lubricants for use with food processing equipment (NSF H1 registered products) are used as a pressure medium, safety in food processing machinery and medical equipment has improved.(*When using ETP-E Plus R models.)

ETP-E Plus Models Specifications

ETP-E Plus (N) Types
- [Specifications]
- [Dimensions]
ETP-E Plus (C) Types（Easy rustproofing method）*Manufactured upon receipt of orders
- [Specifications]
- [Dimensions]
ETP-E Plus (R) Types（Stainless）
- [Specifications]
- [Dimensions]

ETP-E Plus (N) Types

[Specifications]

Model	Shaft tol.		Rated torque [N･m]	Rated thrust [N]	Rated radial load [N]	Shaft contact pressure [N/mm²]	Hub contact pressure [N/mm²]	Tightening torque [N･m]	Moment of inertia [kg ･m²]	Mass[kg]
Model	h7	k6(j6)	Rated torque [N･m]	Rated thrust [N]	Rated radial load [N]	Shaft contact pressure [N/mm²]	Hub contact pressure [N/mm²]	Tightening torque [N･m]	Moment of inertia [kg ･m²]	Mass[kg]
ETP-E-015-N	●		46	5100	500	90	70	7	0.042 × 10^-3	0.16
ETP-E-019-N	●	○	85	7300	1000	90	70	7	0.063 × 10^-3	0.20
ETP-E-020-N	●		110	9100	1000	90	70	7	0.069 × 10^-3	0.21
ETP-E-022-N	●	○	130	9600	1200	90	70	7	0.095 × 10^-3	0.25
ETP-E-024-N	●	○	190	13000	1400	90	70	7	0.109 × 10^-3	0.26
ETP-E-025-N	●		230	15000	1500	90	70	7	0.114 × 10^-3	0.27
ETP-E-028-N	●	○	280	16000	1800	90	70	7	0.166 × 10^-3	0.33
ETP-E-030-N	●		380	21000	2000	90	70	7	0.185 × 10^-3	0.35
ETP-E-032-N	●	○	440	22000	2200	90	70	7	0.244 × 10^-3	0.41
ETP-E-035-N	●	○	640	30000	2500	90	70	7	0.317 × 10^-3	0.47
ETP-E-038-N	●	○	890	38000	2800	90	70	24	0.756 × 10^-3	0.83
ETP-E-040-N	●		1100	45000	3000	90	70	24	0.836 × 10^-3	0.88
ETP-E-042-N	●	○	1100	43000	3200	90	70	24	0.959 × 10^-3	0.95
ETP-E-045-N	●		1400	51000	3500	90	70	24	1.152 × 10^-3	1.03
ETP-E-048-N	●	○	1700	57000	4000	90	70	24	1.430 × 10^-3	1.09
ETP-E-050-N	●		1900	63000	4500	90	70	24	1.497 × 10^-3	1.18
ETP-E-055-N	●	○	2400	71000	5000	90	70	24	2.130 × 10^-3	1.46
ETP-E-060-N	●		3300	90000	5300	90	70	24	3.089 × 10^-3	1.79
ETP-E-070-N	●		5600	130000	6400	90	70	40	6.951×10-3	2.93
ETP-E-080-N	●		8700	180000	7500	90	70	40	10.02×10-3	3.58
ETP-E-090-N	●		12000	230000	8600	90	70	40	14.84×10-3	4.54
ETP-E-100-N	●		17000	280000	9700	90	70	40	21.00×10-3	5.51

*The ● mark is a standard specification and supports shaft tolerance h7 (g6 · h6), and the sizes marked with ○ can support shaft tolerance k6 (j6) as an option.

*ETP-E-035-NK (compatible with k6(j6) tolerance) is also compatible with mating shaft tolerance 0 to +0.010.

*The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero.

*The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20℃ .

*ETP-E-070-N to 100-N is a built-to-order product.

[Dimensions]

Unit [mm]

Model	d	D	D1	D2	L	L1	R	N	M
ETP-E-015-N	15	18	46	50	23	37	15.1	5	1-M10
ETP-E-019-N	19	23	50.5	55	25	39	17.4	5	1-M10
ETP-E-020-N	20	24	51.5	56	27	41	18	5	1-M10
ETP-E-022-N	22	27	55.5	61	29	43	19.3	5	1-M10
ETP-E-024-N	24	29	57.5	63	30	44	20.3	5	1-M10
ETP-E-025-N	25	30	58	63	32	46	20.8	5	1-M10
ETP-E-028-N	28	34	63	70	34	48	22.6	5	1-M10
ETP-E-030-N	30	36	64.5	71	36	50	23.6	5	1-M10
ETP-E-032-N	32	39	68.5	78	38	52	24.8	5	1-M10
ETP-E-035-N	35	42	73	86	41	55	26.4	5	1-M10
ETP-E-038-N	38	46	84.5	92.5	47	67	31	8	1-M16
ETP-E-040-N	40	48	86.5	94	50	70	32	8	1-M16
ETP-E-042-N	42	51	89	96.5	50	70	33.2	8	1-M16
ETP-E-045-N	45	54	93	101	52	72	34.8	8	1-M16
ETP-E-048-N	48	59	97	104	53	73	36.8	8	1-M16
ETP-E-050-N	50	60	98.5	106	54	74	37.5	8	1-M16
ETP-E-055-N	55	67	106	116	59	79	40.5	8	1-M16
ETP-E-060-N	60	73	115.5	123.5	63	83	43.3	8	1-M16
ETP-E-070-N	70	85	135.5	150	77	101	50.8	10	1-M20
ETP-E-080-N	80	97	145.5	160	86	110	56.3	10	1-M20
ETP-E-090-N	90	109	155.5	169	95	119	61.8	10	1-M20
ETP-E-100-N	100	121	166	180	104	128	67.3	10	1-M20

*Dimension φD2 is that before tightening the ETP-EXPRESS.

*The nominal diameter of the pressure screw M is equal to the quantity minus the nominal diameter of the screw threads.

ETP-E Plus (C) Types（Easy rustproofing method）*Manufactured upon receipt of orders

[Specifications]

Model	Shaft tol.		Rated torque [N･m]	Rated thrust [N]	Rated radial load [N]	Shaft contact pressure [N/mm²]	Hub contact pressure [N/mm²]	Tightening torque [N･m]	Moment of inertia [kg ･m²]	Mass[kg]
Model	h7	k6(j6)	Rated torque [N･m]	Rated thrust [N]	Rated radial load [N]	Shaft contact pressure [N/mm²]	Hub contact pressure [N/mm²]	Tightening torque [N･m]	Moment of inertia [kg ･m²]	Mass[kg]
ETP-E-015-C	●		34	3800	500	90	70	7	0.042 × 10^-3	0.16
ETP-E-019-C	●	○	63	5400	1000	90	70	7	0.063 × 10^-3	0.20
ETP-E-020-C	●		82	6800	1000	90	70	7	0.069 × 10^-3	0.21
ETP-E-022-C	●	○	97	7200	1200	90	70	7	0.095 × 10^-3	0.25
ETP-E-024-C	●	○	142	9700	1400	90	70	7	0.109 × 10^-3	0.26
ETP-E-025-C	●		172	11200	1500	90	70	7	0.114 × 10^-3	0.27
ETP-E-028-C	●	○	210	12000	1800	90	70	7	0.166 × 10^-3	0.33
ETP-E-030-C	●		285	15000	2000	90	70	7	0.185 × 10^-3	0.35
ETP-E-032-C	●	○	330	16000	2200	90	70	7	0.244 × 10^-3	0.41
ETP-E-035-C	●	○	480	22000	2500	90	70	7	0.317 × 10^-3	0.47
ETP-E-038-C	●	○	667	28000	2800	90	70	24	0.756 × 10^-3	0.83
ETP-E-040-C	●		825	33000	3000	90	70	24	0.836 × 10^-3	0.88
ETP-E-042-C	●	○	825	32000	3200	90	70	24	0.959 × 10^-3	0.95
ETP-E-045-C	●		1050	38000	3500	90	70	24	1.152 × 10^-3	1.03
ETP-E-048-C	●	○	1275	42000	4000	90	70	24	1.430 × 10^-3	1.09
ETP-E-050-C	●		1425	47000	4500	90	70	24	1.497 × 10^-3	1.18
ETP-E-055-C	●	○	1800	53000	5000	90	70	24	2.130 × 10^-3	1.46
ETP-E-060-C	●		2475	67000	5300	90	70	24	3.089 × 10^-3	1.79

*The ● mark is a standard specification and supports shaft tolerance h7 (g6 · h6), and the sizes marked with ○ can support shaft tolerance k6 (j6) as an option.

*ETP-E-035-CK (compatible with k6(j6) tolerance) is also compatible with mating shaft tolerance 0 to +0.010.

*The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero.

*The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20℃ .

[Dimensions]

Unit [mm]

Model	d	D	D1	D2	L	L1	R	N	M
ETP-E-015-C	15	18	46	49	23	37	15.1	5	1-M10
ETP-E-019-C	19	23	50.5	53	25	39	17.4	5	1-M10
ETP-E-020-C	20	24	51.5	55	27	41	18	5	1-M10
ETP-E-022-C	22	27	55.5	61	29	43	19.3	5	1-M10
ETP-E-024-C	24	29	57.5	63	30	44	20.3	5	1-M10
ETP-E-025-C	25	30	58	63	32	46	20.8	5	1-M10
ETP-E-028-C	28	34	63	70	34	48	22.6	5	1-M10
ETP-E-030-C	30	36	64.5	71	36	50	23.6	5	1-M10
ETP-E-032-C	32	39	68.5	78	38	52	24.8	5	1-M10
ETP-E-035-C	35	42	73	86	41	55	26.4	5	1-M10
ETP-E-038-C	38	46	84.5	90	47	67	31	8	1-M16
ETP-E-040-C	40	48	86.5	92	50	70	32	8	1-M16
ETP-E-042-C	42	51	89	94	50	70	33.2	8	1-M16
ETP-E-045-C	45	54	93	101	52	72	34.8	8	1-M16
ETP-E-048-C	48	59	97	104	53	73	36.8	8	1-M16
ETP-E-050-C	50	60	98.5	106	54	74	37.5	8	1-M16
ETP-E-055-C	55	67	106	116	59	79	40.5	8	1-M16
ETP-E-060-C	60	73	115.5	133	63	83	43.3	8	1-M16

*Dimension φD2 is that before tightening the ETP-EXPRESS.

*The nominal diameter of the pressure screw M is equal to the quantity minus the nominal diameter of the screw threads.

ETP-E Plus (R) Types（Stainless）

[Specifications]

Model	Shaft tol.		Rated torque [N･m]	Rated thrust [N]	Rated radial load [N]	Shaft contact pressure [N/mm²]	Hub contact pressure [N/mm²]	Tightening torque [N･m]	Moment of inertia [kg ･m²]	Mass[kg]
Model	h7	k6	Rated torque [N･m]	Rated thrust [N]	Rated radial load [N]	Shaft contact pressure [N/mm²]	Hub contact pressure [N/mm²]	Tightening torque [N･m]	Moment of inertia [kg ･m²]	Mass[kg]
ETP-E-015-R	●		46	5100	500	90	70	7	0.042×10^-3	0.16
ETP-E-020-R	●		110	9100	1000	90	70	7	0.068×10^-3	0.21
ETP-E-025-R	●		230	15000	1500	90	70	7	0.113×10^-3	0.27
ETP-E-030-R	●		380	21000	2000	90	70	7	0.184×10^-3	0.35
ETP-E-035-R	●		640	30000	2500	90	70	7	0.315×10^-3	0.47
ETP-E-040-R	●		1100	45000	3000	90	70	24	0.826×10^-3	0.87
ETP-E-045-R	●		1400	51000	3500	90	70	24	1.140×10^-3	1.03
ETP-E-050-R	●		1900	63000	4500	90	70	24	1.480×10^-3	1.18
ETP-E-060-R	●		3300	90000	5300	90	70	24	3.065×10^-3	1.79

*Only size with shaft h7(g6･h6) are supported.

*The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero.

*The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20℃ .

[Dimensions]

Unit [mm]

Model	d	D	D1	D2	L	L1	R	N	M	r	V[°]
ETP-E-015-R	15	18	46	50	23	37	15.1	5	1-M10	20	59
ETP-E-020-R	20	24	51.5	56	27	41	18	5	1-M10	22.5	61.5
ETP-E-025-R	25	30	58	63	32	46	20.8	5	1-M10	25.3	62
ETP-E-030-R	30	36	64.5	71	36	50	23.6	5	1-M10	28.9	63
ETP-E-035-R	35	42	73	86	41	55	26.4	5	1-M10	33.1	60.5
ETP-E-040-R	40	48	86.5	94	50	70	32	8	1-M16	37.5	59.5
ETP-E-045-R	45	54	93	101	52	72	34.8	8	1-M16	40.8	59.5
ETP-E-050-R	50	60	98.5	106	54	74	37.5	8	1-M16	43.3	60.5
ETP-E-060-R	60	73	115.5	123.5	63	83	43.3	8	1-M16	51.9	59