ETP-A Model

[Specifications]

ETP-A Specifications

Model	Rated Torque [N·m]	Rated Thrust [N]	Rated Radial Load [N]	Axial side pressure [N/mm²]	Hub Bearing Pressure [N/mm²]	Tightening torque [N·m]	Moment of inertia [kg·m²]	Mass [kg]
ETP-A-15	55	7300	2,500	90	80	6	0.018 × 10−3	0.1
ETP-A-19	100	10,600	5800	90	80	8	0.046 × 10^(−3)	0.17
ETP-A-20	125	6600	6600	90	80	8	0.046 × 10^(−3)	0.16
ETP-A-22	135	12,500	8200	90	80	8	0.065 × 10^(−3)	0.19
ETP-A-24	200	16,700	9,800	90	80	8	0.067 × 10^(−3)	0.20
ETP-A-25	250	20000	10,600	90	80	8	0.071 × 10^(−3)	0.19
ETP-A-28	300	21,400	13,100	90	80	8	0.12 × 10^(−3)	0.26
ETP-A-30	420	28,000	14,700	90	80	8	0.14 × 10^(−3)	0.29
ETP-A-32	420	26,300	16,300	90	80	8	0.20 × 10^(−3)	0.35
ETP-A-35	650	37,100	18,800	90	80	8	0.25 × 10^(−3)	0.4
ETP-A-38	750	39,500	21,200	90	80	8	0.31 × 10^(−3)	0.43
ETP-A-40	940	47,000	22,800	90	80	8	0.44 × 10^(−3)	0.55
ETP-A-42	940	44,800	24,400	90	80	8	0.47 × 10^(−3)	0.55
ETP-A-45	1290	57,300	26,900	90	80	13	0.69 × 10^(−3)	0.71
ETP-A-48	1570	65,400	29,300	90	80	13	0.83 × 10−3	0.78
ETP-A-50	1900	76,000	30,900	90	80	13	1.05 × 10^(−3)	0.86
ETP-A-55	2500	90,900	35,000	90	80	13	1.43 × 10^(−3)	1.06
ETP-A-60	3400	113,000	39,100	90	80	13	2.15 × 10^(−3)	1.37
ETP-A-65	3500	108,000	43,100	90	80	13	3.10 × 10−3	1.67
ETP-A-70	5200	149,000	47,200	90	80	32	4.08 × 10−3	2.04
ETP-A-75	6300	168,000	51,300	90	80	32	5.50 × 10^(−3)	2.42
ETP-A-80	8800	220,000	55,000	90	80	32	8.10 × 10^(−3)	2.64
ETP-A-90	11,000	240,000	60,000	90	80	32	12.2 × 10−3	3.54
ETP-A-100	15,500	310,000	62,000	90	80	32	19.9 × 10^(−3)	4.8

Unit [mm]

Model	d	D	D1	L	L1	L2	L3	L4	M
ETP-A-15	15	23	37.5	17	28	33	5	5.4	3-M5 × 10
ETP-A-19	19	28	45	21	34	39	5.5	6.9	3-M5 × 12
ETP-A-20	20	28	45	22	35	40	5.5	6.4	3-M5 × 12
ETP-A-22	22	32	49	22	35	40	5.5	6.4	4-M5 × 12
ETP-A-24	24	34	49	25	38	43	5.5	6.4	4-M5 × 12
ETP-A-25	25	34	49	27	41	46	5.5	6.9	4-M5 × 12
ETP-A-28	28	39	55	29	43	48	5.5	6.9	4-M5 × 12
ETP-A-30	30	41	57	32	46	51	5.5	6.9	4-M5 × 12
ETP-A-32	32	43	60	34	50	55	7	7.4	4-M5 × 14
ETP-A-35	35	47	62.5	37	53	58	7	7.4	6-M5 × 14
ETP-A-38	38	50	65	41	57	62	7	7.4	6-M5 × 14
ETP-A-40	40	53	70	43	60	65	7.5	8.4	6-M5 × 16
ETP-A-42	42	55	70	45	62	67	7.5	8.4	6-M5 × 16
ETP-A-45	45	59	77	49	66	72	8	8.4	6-M6 × 16
ETP-A-48	48	62	80	52	70	76	8	8.4	6-M6 × 16
ETP-A-50	50	65	83	53	72	78	8.5	9.4	6-M6 × 18
ETP-A-55	55	71	88	58	77	83	9	9.4	8-M6 × 18
ETP-A-60	60	77	95	64	85	91	10	10.4	8-M6 × 20
ETP-A-65	65	84	102	68	90	96	9.5	10.9	8-M6 × 20
ETP-A-70	70	90	113	72	94	102	9.5	10.9	6-M8 × 20
ETP-A-75	75	95	118	85	108	116	11	11	6-M8 × 22
ETP-A-80	80	100	123	90	114	122	11	11	6-M8 × 22
ETP-A-90	90	112	135	100	127	135	12.5	12.5	8-M8 × 25
ETP-A-100	100	125	148	110	139	147	13.2	13	8-M8 × 25

Dimensions L1 and L2 apply when the <ETP-CLASSIC> is installed. These dimensions may vary slightly depending on the fit tolerances of the shaft diameter and hub bore.
The price of Clamping Bolt M is calculated as: quantity × thread size × nominal length.