PDC Models

ダウンロード

PDC Models Specifications

PDC

[Specifications1]

Model	Motor output[kW]	Poles	Power supply Voltage[V]/Frequency[Hz]	Speed change ratio	Speed changer in use		Belt model in use	Mass[kg]
Model	Motor output[kW]	Poles	Power supply Voltage[V]/Frequency[Hz]	Speed change ratio	Motor side speed changer model	Machine side speed changer model	Belt model in use	Mass[kg]
PDC-02N	0.2	4	3-phase 200/50、200・220/60	1:4	AK-90-MA-11	PE-106-MA-12H	1022V220S	20.5
PDC-04N	0.4	4	3-phase 200/50、200・220/60	1:3.5	AK-124-MA-14N	PE-124-MA-15H	1422V270S	29.5
PDC-07N	0.75	4	3-phase 200/50、200・220/60	1:4	AK-140-MA-19N	PE-155-MA-18H	1422V270S	40
PDC-15N	1.5	4	3-phase 200/50、200・220/60	1:4	AK-155-MA-24N	PE-185-MA-22H	1922V298S	58
PDC-22N	2.2	4	3-phase 200/50、200・220/60	1:4.5	AK-185-MA-28N	PE-216-MA-25H	2322V364S	71.5
PDC-37N	3.7	4	3-phase 200/50、200・220/60	1:3	AK-216-MA-28N	PE-216-MA-30H	2322V396S	88

※Totally enclosed fan cooled motors in conformance with JIS C 4210 for 0.2kW･0.4kW motors, and JIS C 4213 for motors over 0.75 kW.

[Specifications2]

Model	Output shaft rotation speed [min^-1]&Output shaft torque[N･m]
	50Hz		60Hz
	Output shaft rotation speed[min^-1]	Output shaft torque[N･m]	Output shaft rotation speed[min^-1]	Output shaft torque[N･m]
PDC-02N	500～2000	3～0.6	600～2400	2.4～0.5
PDC-04N	720～2520	3.6～1	870～3050	2.9～0.8
PDC-07N	600～2400	9.2～2.4	720～2880	7.5～2
PDC-15N	500～2000	19～5.4	600～2400	15～4.3
PDC-22N	500～2250	28～8.2	600～2700	22～6.6
PDC-37N	780～2350	40～11	940～2820	32～8.8

[Dimensions]

Unit [mm]

Model	PDC-02N	PDC-04N	PDC-07N	PDC-15N	PDC-22N	PDC-37N
A	322	398	396	433	513	557
B₁	347	376	425	485	570	580
B₂	137	154	165	195	230	240
B₃	86	117	145	165	200	210
B₄	51	80	75	105	130	140
C	95	110	120	130	140	152
E	240	280	290	320	390	390
F	180	200	240	270	320	320
G	150	160	200	230	280	280
H	165	185	210	235	264	276
J	45	40	65	65	80	85
K	35	42	58	67	64	64
L	198	242	230	249	294	309
M₁	300	340	350	380	450	450
M₂	0	3	3	8	31	31
N	200	240	280	310	360	360
PC	163	200	172	182	230	247
Q	60	60	85	85	100	105
R₁	70	86	86	86	86	86
R₂	90	100	110	121	150	150
T	15	15	20	20	20	20
X	11	28	25	25	25	25
Z	10	12	15	15	15	15
S	20	20	25	25	30	30
U	22.5	22.5	28	28	33	33
W	6	6	8	8	8	8

Options of PDC Models

Index Handle SD-Equipped

ハModels equipped with an index handle to allow easier reading of handle turns. When the handle is rotated once, the little hand moves one gradation. This makes it possible to minutely read handle turns.

Model	Speed changer unit size	Index handle model	L1[mm]	M1[mm]
AK-90-MA-11-SD	02	SD-53B-9L	154.5	70
AK-124-MA-14N-SD	04	SD-53B-90A-9L	190	90
AK-140-MA-19N-SD	07	SD-53B-90A-9L	195	90
AK-155-MA-24N-SD	15	SD-53B-90A-9L	230	90
AK-185-MA-28N-SD	22	SD-53B-90A-12L	258	90
AK-216-MA-28N-SD	37	SD-53B-90A-12L	266	90

* For other dimensions, check the Specifications/Dimensions page for PDS.

Units with Remote Controllers

These are flexible-shaft remote controllers that can be used with belttype stepless speed changer units to allow remote operation. They are available as RFA type controllers, which have a flexible shaft in the motor shaft axial direction, or as RFB type controllers, where the flexible shaft is perpendicular to the motor shaft.

RFA-type

Speed changers Unit size	No. of handle turns	Standard flexible shaft length [mm]	Model for motor-side speed changer	Remote controller RF model
02（0.2kW）	5	1000・1600・2500	AK-90-MA-11-RFA	RFA-90-A
04（0.4kW）	5.5	1000・1600・2500	AK-124-MA-14N-RFA	RFA-124-A
07（0.75kW）	7.5	1000・1600・2500	AK-140-MA-19N-RFA	RFA-140-A
15（1.5kW）	8.5	1000・1600・2500	AK-155-MA-24N-RFA	RFA-155-A
22（2.2kW）	10.5	1000・1600・2500	AK-185-MA-28N-RFA	RFA-185-A
37（3.7kW）	8.5	1000・1600・2500	AK-216-MA-28N-RFA	RFA-216-A

RFB-type

Speed changers Unit size	No. of handle turns	Standard flexible shaft length [mm]	Model for motor-side speed changer
02（0.2kW）	10	1000・1600・2500	AK-90-MA-11-RFB	RFB-90-A
04（0.4kW）	11	1000・1600・2500	AK-124-MA-14N-RFB	RFB-124-A
07（0.75kW）	15	1000・1600・2500	AK-140-MA-19N-RFB	RFB-140-A
15（1.5kW）	17	1000・1600・2500	AK-155-MA-24N-RFB	RFB-155-A
22（2.2kW）	21	1000・1600・2500	AK-185-MA-28N-RFB	RFB-185-A
37（3.7kW）	17	1000・1600・2500	AK-216-MA-28N-RFB	RFB-216-A

RFB-types allow you to choose the flexible shaft direction.

Items Checked for Design Purposes

Units with a remote controller have the following configuration with regard to standard units.

・Motor-side speed changer for remote controller AK (RF)
・Remote Controllers RF
・Flexible shaft
・Index handle (Option)

Ensure that the curve of flexible shafts is within a radius of R300 mm. If flexible shafts cannot be routed easily, place guides, etc. on the flexible shafts.
Standard flexible shaft lengths are 1000, 1600, 2500 mm. Consult Miki Pulley regarding lengths that are also available other than standard length.

Motor Side Speed Changer AK (RF) for Remote Controller RF

These are dedicated motor side speed changers that allow the speed to be changed with an RF remote controller.

Model	Speed changer Unit size	Common dimensions [mm]							RFA dimensions[mm]					RFB dimensions[mm]								No. of handle turns
Model	Speed changer Unit size	A	F	K	M	N	P	Q	B	C	D	E	G	B	C	D	E	G	H	J	L	RFA	RFB
AK-90-MA-11-RF[ ]	02	90	10	55	67	10	17	10	154	134	20	-	6	171	149	22	78	4	20	62	70	5	10
AK-124-MA-14N-RF[ ]	04	124	10	48	107	11	53	10	160	124	24	12	4	162	140	22	78	4	20	62	70	5.5	11
AK-140-MA-19N-RF[ ]	07	140	10	48	112	15	53	10	169	133	24	12	4	171	149	22	78	4	20	62	70	7.5	15
AK-155-MA-24N-RF[ ]	15	155	10	48	142	17	53	10	201	165	24	12	4	203	181	22	78	4	20	62	70	8.5	17
AK-185-MA-28N-RF[ ]	22	185	10	53	165	21	62	10	228	192	24	12	4	230	208	22	78	4	20	62	70	10.5	21
AK-216-MA-28N-RF[ ]	37	216	10	53	175	17.5	74	10	236	200	24	12	4	238	216	22	78	4	20	62	70	8.5	17

Remote Controller RF

Portion for flexible shaft-type remote controller.

Model	Speed changer Unit size	Dimensions [mm]																No. of handle turns
Model	Speed changer Unit size	A	B	B2	C	D	E	F	K	L	M	N	R	R2	S	T	Z	RFA	RFB
RFA-90-A / RFB-90-A	02	100	75	81	25	10	82	20	38	70	10	14	70	70	25	11	7	5	10
RFA-124-A/RFB-124-A	04	118	94	120	25	10	100	20	38	70	10	14	86	90	25	12	7	5.5	11
RFA-140-A/RFB-140-A	07	118	94	120	25	10	100	20	38	70	10	14	86	90	25	12	7	7.5	15
RFA-155-A/RFB-155-A	15	118	94	120	25	10	100	20	38	70	10	14	86	90	25	12	7	8.5	17
RFA-185-A/RFB-185-A	22	118	104	131	25	10	100	20	38	70	13	18	86	90	25	12	7	10.5	21
RFA-216-A/RFB-216-A	37	118	104	131	25	10	100	20	38	70	13	18	86	90	25	12	7	8.5	17

* Models listed in the “Model” column above are handle-only models (without a flexible shaft). To order models with an index handle, add “-A” to “-SD” to the end of the order.

Index Handle SD for Remote Operation Device RF

Model	Applied index handle
Model	RFA	RFB
RFA-90-SD/RFB-90-SD	SD-53B-9L	SD-53B-12L
RFA-124-SD/RFB-124-SD	SD-53B-90A-9L	SD-53B-90A-12L
RFA-140-SD/RFB-140-SD	SD-53B-90A-9L	SD-53B-90A-16L
RFA-155-SD/RFB-155-SD	SD-53B-90A-9L	SD-53B-90A-25L
RFA-185-SD/RFB-185-SD	SD-53B-90A-12L	SD-53B-90A-25L
RFA-216-SD/RFB-216-SD	SD-53B-90A-12L	SD-53B-90A-25L

Handle Mounting Square Hole for Adjustment during Stop TH

Fine adjustments and positioning can be performed easily by using the handle inserted to this hole during machine stop.
Mount the adjustment handle for adjustment during stop TH to the square hole bushing of the PE model speed change pulley to perform fine adjustments and positioning.
Please order an adjustment handle for adjustment during stop (TH-125- □ ) separately.

Dimensions When the Handle Is Attached to the PDG-BS Unit

Unit [mm]

Handle model	Speed change pulley	A	B	C	D	□F	L	X	Z
TH-125-12	PE-106	106	90	176	14	12	91	15	24
TH-125-12	PE-124	124	125	169	21	12	122	15	28
TH-125-15	PE-155	155	145	176	14	15	151	15	32
TH-125-15	PE-185	185	165	172	18	15	172	20	40
TH-125-15	PE-216	216	200	175	15	15	205	20	50
TH-125-15	PE-216	216	200	165	25	15	205	20	50

Related Product

Basic Specifications

Standard applied motor output 0.2 kW to 18.5 kW （4-pole）

Movable distance 0 mm to 200 mm

AP Models （single-type variable-pitch pulleys）

Basic Specifications

Standard applied motor output 0.2 kW to 1.5 kW （4-pole）

Speed change ratio Approx. 1:2

Outer diameter of pulley 86 mm to 164 mm

Basic Specifications

Motor output 0.2 kW to 1.5 kW （4-pole）

Power supply voltage Three-phase 200 V/50 Hz, 200 or 220 V/60 Hz

Speed reduction ratios 1/10, 1/20, 1/30, 1/40, 1/50, 1/60

Basic Specifications

Transmitted capacity 0.2 kW to 2.2 kW

Speed change ratio 1:2 to 1:4

Outer diameter of pulley 103 mm to 260 mm

PDC Models

Features of PDC Models

PDC Models Specifications

Options of PDC Models

Index Handle SD-Equipped

Units with Remote Controllers

Motor Side Speed Changer AK (RF) for Remote Controller RF

Remote Controller RF

Index Handle SD for Remote Operation Device RF

Handle Mounting Square Hole for Adjustment during Stop TH

Related Product