AXM Models

ダウンロード

Features of AXM Models

These are solid-shaft geared motors for motor outputs of 0.2 kW to 1.5 kW (4-pole).They use B14 flange motors for a very compact design that saves space in mechanical devices.

AXM Models Specifications

AXM

[Specifications1]

Model	Motor output[kW]	Poles	Power supply Voltage[V]/Frequency[Hz]	Speed reducer frame number	Speed reduction ratio						Mass[kg]
Model	Motor output[kW]	Poles	Power supply Voltage[V]/Frequency[Hz]	Speed reducer frame number	10	20	30	40	50	60	Mass[kg]
AXM-02-50N-□-□-IE1	0.2	4	3-phase 200/50、200・220/60	50	1/10	1/20	1/30	1/40	1/50	1/60	14
AXM-04-60N-□-□-IE1	0.4	4	3-phase 200/50、200・220/60	60	1/10	1/20	1/30	1/40	1/50	1/60	17
AXM-07-70N-□-□-IE3	0.75	4	3-phase 200/50、200・220/60	70	1/10	1/20	1/30	1/40	1/50	1/60	32
AXM-15-80N-□-□-IE3	1.5	4	3-phase 200/50、200・220/60	80	1/10	1/20	1/30	1/40	1/50	1/60	43

Totally enclosed fan cooled motors in conformance with JIS C 4210 for 0.2kW･0.4kW motors, and JIS C 4213 for motors over 0.75 kW.

[Specifications2]

Model	Frequency[Hz]	Output shaft revolution speed[min^-1] and output shaft torque[N･m] in each deceleration ratio
		1/10		1/20		1/30		1/40		1/50		1/60
		Speed	Torque	Speed	Torque	Speed	Torque	Speed	Torque	Speed	Torque	Speed	Torque
AXM-02-50N-□-□-IE1	50	143	10.7	71.5	18.7	47.7	26.2	35.8	30.3	28.6	36.7	23.8	40.9
AXM-02-50N-□-□-IE1	60	171.5	9.1	85.8	16	57.2	22.6	42.9	26.4	34.3	32.1	28.6	35.9
AXM-04-60N-□-□-IE1	50	142.5	21.7	71.3	39.5	47.5	54.1	35.6	66.4	28.5	75.4	23.8	75.5
AXM-04-60N-□-□-IE1	60	171	18.3	85.5	33.6	57	46.4	42.8	57.2	34.2	64.6	28.5	70.9
AXM-07-70N-□-□-IE3	50	144	41.3	72	76.9	48	105	36	133	28.8	112	24	114
AXM-07-70N-□-□-IE3	60	172.5	34.6	86.3	65.1	57.5	88.1	43.1	114	34.5	105	28.8	106
AXM-15-80N-□-□-IE3	50	145	84.8	72.5	156	48.3	215	36.3	193	29	191	24.2	162
AXM-15-80N-□-□-IE3	60	174	71.5	87	132	58	183	43.5	179	34.8	177	29	151

※Output shaft revolution speed and output shaft torque values calculated at a 200V/50･60Hz rated value load. However, there are instances when output shaft torque is limited by the reducer tolerance.

[Dimensions]

Unit[mm]

Model	Dimensions of part															Dimensions of shaft
Model	A	B	B1	B2	C	E	F	F1	F2	H	KL	L	P	X	Z	Q	QK	S	U	W
AXM-02-50N-□-□-IE1	142	204	124	100	118	221.5	165	50	80	239	109	351.5	45	131	10	40	35	17	19	5
AXM-04-60N-□-□-IE1	165	219	143	115	140	233	192	60	90	258	109	385.5	52.5	131	12	50	45	22	24.5	6
AXM-07-70N-□-□-IE3	190	246.5	160	130	160	270.5	225	70	105	291.5	116.5	445.5	65	162	14	60	55	28	31	8
AXM-15-80N-□-□-IE3	220	265	170	140	190	295.5	252	80	112	317	125	494	70	187	14	65	60	32	35	10