BE Model (for general control)

This is the basic model of a power supply unit for controlling electromagnetic clutches and brakes rated at 24 V DC. Simply connect it to either a 100 V AC or 200 V AC power source to obtain the 24 V DC required to operate electromagnetic clutches and brakes.It uses a transformer to provide isolation and step down the voltage, outputting a full-wave rectified DC 24V.

[Specifications]

BE/BER/BEZ Specifications

Item	Specification	BE-05	BE-10	BE-20	BE-40	BER-05	BER-10	BEZ-10	BEZ-20
Dimensions / Shapes	See dimension list	Shape 1	Shape 2	Shape 3	Shape 4	Shape 2	Shape 3	Shape 2	Shape 3
Input voltage	AC 100 V ±10% 50/60 Hz	●	●	●	●	●	●	●	●	●	●
	AC 110 V ±10% 50/60 Hz							●	●	●	●
	AC 200 V ±10% 50/60 Hz	●	●	●	●	●	●	●	●	●	●
	AC 220 V ±10% 50/60 Hz							●	●	●	●
Output voltage	Transformer step-down, single-phase full-wave rectification, unsmoothed	DC 24 V	DC 24 V	DC 24 V	24 V DC	24 V DC	24 V DC	24 V DC, 2 outputs, built-in relay	24 V DC, 2 outputs, built-in relay	DC 21.5 V	DC 21.5 V
Rating / Capacity	Continuous Rating	25 W	50 W	100 W	200 W	25 W	50 W	56.6 W	56.6 W	114 W	114 W
Size settings	◎: Can connect 2 or more units　●: Applicable　△: Applicable depending on clutch/brake model	01	◎	◎	◎	◎	●		◎	12	◎
		02	◎	◎	◎	◎	●		◎	13	◎
		03	◎	◎	◎	◎	●		◎	15	◎
		04	◎	◎	◎	◎	●		◎	21	◎
		05	◎	◎	◎	◎	●		●	23	◎
		06	●	◎	◎	◎	●		●	25	◎
		08	△	●	◎	◎	△	●		31	●
		10	△	●	◎	◎	△	●		32	●
		12		●	◎	◎		●
		14		△	●	◎		△
		16		△	●	◎		△
		18			●	◎
		20			△	●
		25			△	●
		31			△	●
		40				●
Applicable Clutches and Brakes	Our Clutches and Brakes: Rated Voltage DC 24 V	・Excited Clutches and Brakes ・Non-excited Brakes ・Other General Control Applications						For clutch/brake unit switching control		For dual-clutch applications
Protection Functions	Input side instantaneous fuse	1 A	1 A	3 A	5 A	1 A	1 A	3 A	3 A	5 A	5 A
Operating Environment	No condensation	0 to +50 °C / 10 to 90% RH
Weight	Per unit	1.4 kg	2.4 kg	4.0 kg	6.4 kg	1.6 kg	3.0 kg	3.4 kg	3.4 kg	4.4 kg	4.4 kg