Product Information

Features of ETP-H Models

Shaft and hub are strongly coupled by pumping oil into the sleeve under pressure to move the wedge of the built-in taper piston.The oil used for coupling is only necessary for moving the piston, so after coupling is achieved, the pressure is released and the taper piston is held in place by the wedge effect.

High torque and high thrust

Since the wedge is moved by hydraulic pressure using a pump, the rated torque is very large and able to stand up to heavy thrust loads.

Related Product

PSL-D Models
PSL-D Models
Basic Specifications
Bore diameter 6 mm to 50 mm
Max. rated torque 1760 N･m
Max. rated thrust 70300 N
ETP-T Models
ETP-T Models
Basic Specifications
Bore diameter 15 mm to 100 mm
Max. rated torque 18000 N･m
Concentricity 0.006 mm
PSL-K Models
PSL-K Models
Basic Specifications
Bore diameter 6 mm to 42 mm
Max. rated torque 750 N･m
Max. rated thrust 36000 N
ETP-A Models
ETP-A Models
Basic Specifications
Bore diameter 15 mm to 100 mm
Max. rated torque 15500 N･m
Concentricity 0.05 mm