Product Information

111 Models (brakes) Specifications

111 Models

[Specifications]

ModelSizeDynamic friction torque Td [N・m]Static friction torque Ts [N・m]Coil (at 20℃)Heat resistance classLead wireMax. rotation speed [min-1Armature Moment of inertia J [kg·m2]Total work performed until readjustment of the air gap ET [J]Armature pull-in time ta [s]Torque rise time tp [s]Torque extinction time td [s]Mass [kg]
Voltage [V]Wattage [W]Current [A]Resistance [Ω]UL styleSize
111-06-13G0655.5DC24110.4652BUL3398AWG2280004.23×10-536×1060.0150.0330.0150.28
111-06-12G0655.5DC24110.4652BUL3398AWG2280006.03×10-536×1060.0150.0330.0150.32
111-06-11G0655.5DC24110.4652BUL3398AWG2280006.03×10-536×1060.0150.0330.0150.32
111-08-13G081011DC24150.6338BUL3398AWG1860001.18×10-460×1060.0160.0420.0250.5
111-08-12G081011DC24150.6338BUL3398AWG1860001.71×10-460×1060.0160.0420.0250.58
111-08-11G081011DC24150.6338BUL3398AWG1860001.71×10-460×1060.0160.0420.0250.58
111-10-13G102022DC24200.8329BUL3398AWG1850004.78×10-4130×1060.0180.0560.0300.91
111-10-12G102022DC24200.8329BUL3398AWG1850006.63×10-4130×1060.0180.0560.0301.07
111-10-11G102022DC24200.8329BUL3398AWG1850006.63×10-4130×1060.0180.0560.0301.07
111-12-13G124045DC24251.0423BUL3398AWG1840001.31×10-3250×1060.0270.0900.0501.68
111-12-12G124045DC24251.0423BUL3398AWG1840001.81×10-3250×1060.0270.0900.0501.97
111-12-11G124045DC24251.0423BUL3398AWG1840001.81×10-3250×1060.0270.0900.0501.97
111-16-13G168090DC24351.4616BUL3398AWG1830004.80×10-3470×1060.0350.1270.0553.15
111-16-12G168090DC24351.4616BUL3398AWG1830006.35×10-3470×1060.0350.1270.0553.45
111-16-11G168090DC24351.4616BUL3398AWG1830006.35×10-3470×1060.0350.1270.0553.45
111-20-13G20160175DC24451.8813BUL3398AWG1625001.37×10-210×1080.0650.2000.0705.9
111-20-12G20160175DC24451.8813BUL3398AWG1625001.90×10-210×1080.0650.2000.0707.1
111-20-11G20160175DC24451.8813BUL3398AWG1625001.90×10-210×1080.0650.2000.0707.1
111-25-13G25320350DC24602.59.6BUL3398AWG1620003.58×10-220×1080.0850.2750.12510.5
111-25-12G25320350DC24602.59.6BUL3398AWG1620004.83×10-220×1080.0850.2750.12512.2
111-25-11G25320350DC24602.59.6BUL3398AWG1620004.83×10-220×1080.0850.2750.12512.2

*The dynamic friction torque, Td, is measured at a relative speed of 100 min-1. Depending on the initial torque characteristics, break-in to condition the engaging surfaces may also be required.

*The rotating part moment of inertia and mass are measured for the maximum bore diameter.

[Dimensions]

111-□-13G

111-□-13G

Unit [mm]
SizeRadial direction dimensionsAxial direction dimensions
A1A2A3C1C2C3V1V2V3YZHJKLPXa
06634634.58072353-3.13-6.33-5.556-60°183.52.1227.32.50.2±0.05
08806041.710090423-4.13-83-766-60°204.32.624.58.32.850.2±0.05
101007651.5125112523-5.13-113-976-60°2253.128.193.30.2±0.05
121259561.5150137623-6.13-123-1176-60°245.53.6319.33.30.3+0.05-0.1
1616012079.5190175803-8.23-153-149.56-60°2664.13511.73.50.3+0.05-0.1
2020015899.52302151003-10.23-183-16.29.56-60°3075.141.413.44.90.50-0.2
25250210124.52902701254-12.24-224-2011.58-45°3586.147.9165.50.50-0.2

111-□-13G

[Dimensions]

111-□-12G

111-□-12G

Unit [mm]
SizeRadial direction dimensionsAxial direction dimensions
AC1C2C3YHJKLMPa
06638072355183.52.125.5157.30.2±0.05
088010090426204.32.628.5208.30.2±0.05
101001251125272253.133.12590.2±0.05
12125150137627245.53.637309.30.3+0.05-0.1
16160190175809.52664.1423811.70.3+0.05-0.1
202002302151009.53075.150.44513.40.50-0.2
2525029027012511.53586.158.954160.50-0.2
Unit [mm]
SizeShaft bore dimensions
d H7Models compliant with JIS standardsModels compliant with the old JIS standards
b P9tb P9t
06124-0.012-0.0421.5+0.504+0.050+0.0201.5+0.50
155-0.012-0.0422+0.505+0.050+0.0202+0.50
08155-0.012-0.0422+0.505+0.050+0.0202+0.50
206-0.012-0.0422.5+0.505+0.050+0.0202+0.50
10206-0.012-0.0422.5+0.505+0.050+0.0202+0.50
258-0.015-0.0513+0.507+0.061+0.0253+0.50
12258-0.015-0.0513+0.507+0.061+0.0253+0.50
308-0.015-0.0513+0.507+0.061+0.0253+0.50
16308-0.015-0.0513+0.507+0.061+0.0253+0.50
4012-0.018-0.0613+0.5010+0.061+0.0253.5+0.50
204012-0.018-0.0613+0.5010+0.061+0.0253.5+0.50
5014-0.018-0.0613.5+0.5012+0.075+0.0323.5+0.50
255014-0.018-0.0613.5+0.5012+0.075+0.0323.5+0.50
6018-0.018-0.0614+0.5015+0.075+0.0325+0.50

111-□-12G

[Dimensions]

111-□-11G

111-□-11G

Unit [mm]
SizeRadial direction dimensionsAxial direction dimensions
AC1C2C3EYmHJKL1L2MPTa
0663807235265M4183.52.13725.5157.360.2±0.05
08801009042316M5204.32.644.528.5208.380.2±0.05
1010012511252417M52253.153.133.1259100.2±0.05
1212515013762497M6245.53.66137309.3120.3+0.05-0.1
1616019017580659.5M82664.173423811.7150.3+0.05-0.1
20200230215100839.5M83075.186.450.44513.4180.50-0.2
2525029027012510511.5M103586.1101.958.95416220.50-0.2
Unit [mm]
SizeShaft bore dimensions
d H7Models compliant with JIS standardsModels compliant with the old JIS standards
b P9tb P9t
06124-0.012-0.0421.5+0.504+0.050+0.0201.5+0.50
155-0.012-0.0422+0.505+0.050+0.0202+0.50
08155-0.012-0.0422+0.505+0.050+0.0202+0.50
206-0.012-0.0422.5+0.505+0.050+0.0202+0.50
10206-0.012-0.0422.5+0.505+0.050+0.0202+0.50
258-0.015-0.0513+0.507+0.061+0.0253+0.50
12258-0.015-0.0513+0.507+0.061+0.0253+0.50
308-0.015-0.0513+0.507+0.061+0.0253+0.50
16308-0.015-0.0513+0.507+0.061+0.0253+0.50
4012-0.018-0.0613+0.5010+0.061+0.0253.5+0.50
204012-0.018-0.0613+0.5010+0.061+0.0253.5+0.50
5014-0.018-0.0613.5+0.5012+0.075+0.0323.5+0.50
255014-0.018-0.0613.5+0.5012+0.075+0.0323.5+0.50
6018-0.018-0.0614+0.5015+0.075+0.0325+0.50

111-□-11G

Related Product