Product Information

BEW(W) Models Specifications

BEW (W) Types

[Specifications]

ModelBEW-4W
Input voltageAC100V± 10% 50 Hz/60 Hz
AC200V    
AC400V
Maximum input voltage AC510V
Rectification method For both half- and full-wave rectification
Half-waveFull-waveHalf-waveFull-waveHalf-waveFull-wave
Output voltageDC45VDC90VDC90VDC180VDC180VDC360V
Output current When the ambient temperature is 20℃ values in () are for an ambient temperature of 60℃ DC3.0A (DC2.5A)
Output Wattage When the ambient temperature is 20℃ values in () are for an ambient temperature of 60℃135W (112W)270W (225W)270W (225W)540W (540W)540W (540W)1080W (900W)
Size settings Voltage specifications numbers in parentheses are input voltagesDC45V
(AC100V, half-wave)
DC90V
(AC100V, full-wave)
DC90V
(AC200V, half-wave)
DC180V
(AC200V, full-wave)
DC180V
(AC400V, half-wave)
DC360V
(AC400V, full-wave)
●: Applicable △: Applicable depending on model of clutch or brake01
02 
03
04 
05
06 
08
10 
12
14 
16
18 
20
25 
Applied clutches/brakes MIKI PULLEY electromagnetic
-actuated clutches and brakes
Rated voltage DC 45/90/180 V
Spring-actuated brake
Insulating resistance Between terminal and body DC 500 V, 100 M Ω with Megger
2200 V AC, 50 Hz, 1 min.
Usage environment With no condensation-20 ~ +60℃ / 10 ~ 90%RH
Mass Per product 0.045 kg

[Dimensions]

[Structure]

[Terminals and Functions]

Terminal symbolTerminal nameFunction description
1-2Power supply input terminalConnector for a commercial power supply
3-4Output terminalConnector for an electromagnetic clutch or brake

[Characteristics]

For Both Half-wave Rectified and Full-wave Rectified

For BEW-4W types, you can select between half-wave rectified and fullwave rectified by changing the connections of the wiring as shown in the figure at right.
These power supply devices are high Wattage and allow a wide range of voltage inputs, from low voltage to high. As a result, a wide variety of electromagnetic clutches and brakes can be handled by a single BEW-4W power supply alone.
You can either focus on the type of brake, assuming you will rewire, or conversely, handle a variety of types of brakes with a BEW-4W power supply alone.
[How to Calculate Output Voltage]
Output voltage = Input voltage × a (a set coefficient)
* a (set coefficient) = 0.45: half-wave rectified/0.9: full-wave rectified
(Ex.)
Half-wave: AC200V × 0.45 = DC90V
Full-wave: AC100V × 0.9 = DC90V
Note that when the rated voltage of the electromagnetic coil does not match the output voltage calculated above, you will not be able to obtain the electromagnetic clutch/brake characteristics given in the specifications.

[Wiring Methods and Timing Charts]

Primary Control

Secondary Control

Related Product