日本語
English
Deutsch
中文
한국어
CHP Models
CHP Models Specifications
CHP Models
[Specifications]
| Model | Torque | Misalignment | Max. rotation speed ［min-1］ | Static torsional stiffness ［N・m/rad］ | Moment of inertia ［kg・m2］ | Mass ［kg］ | |||
|---|---|---|---|---|---|---|---|---|---|
| Nominal ［N・m］ | Max. ［N・m］ | Parallel ［mm］ | Angular ［°］ | Axial ［mm］ | |||||
| CHP-20 | 0.4 | 0.8 | 0.5 | 10 | ±0.5 | 9000 | 6.1 | 6.30×10-7 | 0.012 |
| CHP-26 | 0.7 | 1.4 | 0.5 | 10 | ±0.5 | 7000 | 8.5 | 2.40×10-6 | 0.026 |
| CHP-34 | 1.5 | 3.0 | 0.5 | 10 | ±0.5 | 5500 | 19.7 | 7.90×10-6 | 0.051 |
*Static torsional stiffness values given are from measurements taken at 20℃
*The moment of inertia and mass are measured for the minimum bore diameter.
[Dimensions]
Unit ［mm］
| Model | d1, d2 | D | L | L1 | F | M | |
|---|---|---|---|---|---|---|---|
| Min. | Max. | ||||||
| CHP-20 | 3 | 8 | 20 | 28 | 8 | 3 | M3 |
| CHP-26 | 6 | 13 | 26 | 34 | 10 | 4 | M4 |
| CHP-34 | 8 | 18 | 34 | 40 | 12 | 5 | M5 |
*For combination with a CHP-20 that has a bore diameter of ø3, open the set screw to an angle of 120°.
[Standard bore diameter]
| Model | Standard bore diameter d1-d2 [mm] | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | |
| CHP-20 | ● | ● | ● | ● | ● | ● | ||||||||||
| CHP-26 | ● | ● | ● | ● | ● | ● | ● | ● | ||||||||
| CHP-34 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||
*The recommended processing tolerance for paired mounting shafts is the h8 class.
Related Product
Basic Specifications
- Max. transmission torque 1.53N・m（Air gap 1mm）
- Bore ranges 10mm～25mm
Basic Specifications
- Max. rated torque 800 N･m
- Standard bore-drilling range 8 mm to 60 mm
- Backlash Zero
Basic Specifications
- Max. nominal torque 50 N･m
- Pilot-bore additional processing range 4 mm to 48 mm
- Operating temperature -20℃ to 80℃
