General-Purpose Motor Specifications
2026/05/07
*The motors are fully enclosed with external fans; the 0.2 and 0.4 kW models are standard-efficiency motors. Models rated at 0.75 kW or higher are premium-efficiency motors (Top Runner motors).
*The specifications for premium efficiency motors are based on Top Runner motors that comply with JIS C 4213:2014, which corresponds to the efficiency classes (IE codes) defined in JIS C 4034-30:2011.
*Values are for reference only. Frame numbers and rated values may vary depending on the motor manufacturer.
2-pole
| Output [kW] | 0.2 | 0.4 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Efficiency Class (IE Code) Frame Size |
Standard Efficiency (IE1) | Premium Efficiency (IE3) | ||||||||||||||
| 63M | 71M | 80M | 90L | 90L | 112M | 132S | 132S | 160M | 160M | 160L | 180M | 180L | 200L | 200L | ||
| Shaft Diameter and Tolerance [mm] | 11 h6 | 14 j6 | 19 j6 | 24 j6 | 24 j6 | June 28 | 38 k6 | 38 k6 | 42 k6 | 42 k6 | 42 k6 | 48 k6 | 55 m6 | 55 m6 | 55 m6 | |
| Rated Current [A] | 200 V 50 Hz | 1.1 | 1.9 | 3.1 | 5.6 | 8.3 | 13.0 | 20.0 | 26.5 | 38 | 51 | 62 | 74 | 100 | 123 | 149 |
| 200 V 60 Hz | 1.0 | 1.7 | 3.0 | 5.6 | 8.1 | 13.0 | 19.5 | 26.5 | 38 | 51 | 62 | 74 | 100 | 124 | 150 | |
| 220 V 60 Hz | 1.0 | 1.7 | 2.8 | 5.1 | 7.4 | 12.0 | 18.0 | 24.0 | 34 | 46 | 56 | 67 | 90 | 112 | 135 | |
| Rated speed [min⁻¹] | 200 V 50 Hz | 2900 | 2900 | 2850 | 2865 | 2890 | 2930 | 2935 | 2940 | 2950 | 2955 | 2950 | 2960 | 2960 | 2970 | 2975 |
| 200 V 60 Hz | 3475 | 3475 | 3420 | 3435 | 3465 | 3510 | 3525 | 3525 | 3540 | 3545 | 3540 | 3550 | 3550 | 3565 | 3565 | |
| 220V 60Hz | 3500 | 3500 | 3455 | 3470 | 3490 | 3530 | 3540 | 3540 | 3550 | 3555 | 3550 | 3560 | 3560 | 3570 | 3575 | |
4-pole
| Output [kW] | 0.2 | 0.4 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Efficiency Class (IE Code) Frame Size |
Standard Efficiency (IE1) | Premium Efficiency (IE3) | ||||||||||||||
| 63M | 71M | 80M | 90L | 100L | 112M | 132S | 132M | 160M | 160L | 180M | 180M | 180L | 200L | 200L | ||
| Shaft Diameter and Tolerance [mm] | 11 h6 | 14 j6 | 19 j6 | 24 j6 | 28 j6 | June 28 | 38 k6 | 38 K6 | 42 k6 | 42 k6 | 48 k6 | 48 k6 | 55 m6 | 60 m6 | 60 m6 | |
| Rated Current [A] | 200 V 50 Hz | 1.3 | 2.3 | 3.5 | 6.9 | 9.5 | 15.5 | 21.0 | 27.5 | 40 | 54 | 68 | 84 | 116 | 137 | 166 |
| 200 V 60 Hz | 1.1 | 2.0 | 3.2 | 6.1 | 8.5 | 14.0 | 20.0 | 26.5 | 39 | 53 | 66 | 78 | 106 | 133 | 161 | |
| 220 V 60 Hz | 1.1 | 2.0 | 3.1 | 5.9 | 8.3 | 13.5 | 18.5 | 24.5 | 36 | 48 | 62 | 72 | 102 | 124 | 149 | |
| Rated speed [min⁻¹] | 200 V 50 Hz | 1425 | 1425 | 1440 | 1450 | 1450 | 1465 | 1470 | 1470 | 1470 | 1475 | 1480 | 1475 | 1475 | 1480 | 1480 |
| 200 V 60 Hz | 1710 | 1710 | 1725 | 1740 | 1740 | 1755 | 5:20 PM | 1760 | 1765 | 1770 | 1775 | 1770 | 1770 | 1775 | 1775 | |
| 220V 60Hz | 1725 | 1725 | 1740 | 1755 | 1755 | 1765 | 1770 | 1765 | 1770 | 1775 | 1780 | 1775 | 1775 | 1780 | 1780 | |
6-pin
| Output [kW] | 0.2 | 0.4 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Efficiency Class (IE Code) Frame Size |
Standard Efficiency (IE1) | Premium Efficiency (IE3) | ||||||||||||||
| 71M | 80M | 90L | 100L | 112M | 132S | 132M | 160M | 160L | 180M | 180L | 180L | 200L | 200L | 225S | ||
| Shaft Diameter and Tolerance [mm] | 14 j6 | 19 j6 | 24 j6 | 28 j6 | 28 j6 | 38 k6 | 38 K6 | 42 k6 | 42 k6 | 48 k6 | 55 m6 | 55 m6 | 60 m6 | 60 m6 | 65 m6 | |
| Rated Current [A] | 200 V 50 Hz | 1.3 | 2.5 | 4.2 | 7.5 | 11.0 | 18.0 | 25.5 | 33.0 | 45 | 60 | 76 | 89 | 124 | 155 | 190 |
| 200 V 60 Hz | 1.2 | 2.2 | 3.8 | 6.6 | 9.6 | 15.5 | 22.5 | 30.0 | 43 | 57 | 71 | 83 | 116 | 144 | 170 | |
| 220 V 60 Hz | 1.2 | 2.2 | 3.7 | 6.5 | 9.5 | 15.0 | 22.0 | 29.5 | 40 | 53 | 67 | 78 | 111 | 137 | 164 | |
| Rated speed [min⁻¹] | 200 V 50 Hz | 920 | 930 | 965 | 970 | 975 | 975 | 975 | 980 | 980 | 980 | 985 | 985 | 985 | 985 | 980 |
| 200 V 60 Hz | 1100 | 1120 | 1155 | 1160 | 1170 | 11:70 | 1170 | 1175 | 1175 | 1175 | 1180 | 1180 | 1185 | 1185 | 1180 | |
| 220V 60Hz | 1125 | 1135 | 1165 | 1170 | 1175 | 11:75 | 1175 | 1180 | 1180 | 1180 | 1185 | 1185 | 1190 | 1190 | 1180 | |
Other Technical Documents
↓You can download a PDF compilation of the technical documents below.
Specifications
Hole Machining, Tolerances, and Fits
Calculations, Conversions, Formulas, and Units
Machine Elements
- Hexagon Socket Head Cap Screws (Cap Bolts) Standards List | Excerpt from JIS B 1176
- Shapes and Dimensions of Hexagon Socket Set Screws (Excerpt from JIS B 1177-1997)
- Shapes and Dimensions of Hex Bolts (Part Grade A) (Excerpt from JIS B 1180-1985)
- How to Use Hex Socket Set Screws
- Mechanical Properties of Steel Bolts and Screws (Excerpt from JIS B 1051-2000)
- Shapes and Dimensions of Hexagonal Wrenches (Hex Wrenches/L-Wrenches/Hex Wrenches) (Excerpt from JIS B 4648:2008)
- Dimensions and Tolerances of Parallel Keys and Keyways: List of Standards (Excerpt from JIS B 1301-1996/JIS B 1301-1959 [Old JIS])
- Snap Rings (C-Clips/C-Rings) Standards and Dimensions List (Excerpt from JIS B 2804-2010)
- Shim Dimensions
- Ball Bearing Standard Dimensions Table - JIS Excerpt
Material Properties
Terminology
- Glossary of Electromagnetic Clutch and Electromagnetic Brake Terms (Excerpt from JIS B 1404-1:2005)
- Glossary of Screw Terms (JIS B 0101:2013)
- Glossary of Fitting Tolerances (Excerpt from JIS B 0401-1:2016)
- Glossary of Terms for Chains, Sprockets, and Accessories (Excerpt from JIS B 1812:2015)
- Glossary of Friction Belt Drive Terms (Excerpt from JIS B 1860:2018)
- Technical Drawing—Terminology (Excerpt from JIS Z 8114:1999)