Product Information

Options of BXW Models

Dust Covers

There are dust covers available as optional parts. These dust covers can be used to prevent dust and other foreign particles from entering into the parts, enabling the unit to be used in harsher work environments.
There are two types of dust covers to choose from, one without bores drilled into it for the shaft through-holes that can be used to provide full cover and one with bores drilled into it for the shaft through-holes that can be used with the shaft inserted into the brake. There are also options for the positions of lead wire connecting bores, using either a plate-mounting position or a stator-mounting position for mounting the brake.

[Specifications]

MaterialEthylene propylene diene monomer (EPDM) rubber
Temperature range-40°C to +140°C
Exterior colorBlack
Applicable brake modelsL type, H type, S type BXW models
Applicable brake sizes#01, #02, #03, #04, #05
Applicable specification voltages12 V DC, 24 V DC, 45 V DC, 90 V DC 180 V DC

*The temperature range listed is for the dust cover material. The overall operating temperature range for BXW models is from -10°C to +40°C.

*This part cannot be used with BXW models that come with release levers and R type BXW models.

Dimensions

Type No. a b c
01 × × ×
02 × ×
03 × ×
04 × ×
05 ×
06 ×
Unit (mm)
Model ⌀A B ⌀d
BXW-01-C □ 41 33 16
BXW-02-C □ 51 33 21
BXW-03-C □ 60 33.5 24
BXW-04-C □ 69 35.5 30
BXW-05-C □ 79 37.5 30

*The "a" symbol in the drawings is used to indicate parts with drilled bores for inserting shafts, the "b" symbol for parts with drilled bores for connecting lead wires for mounted plates, and the "c" symbol for parts with drilled bores for connecting lead wires for mounted stators.

*Types no. 01 and 04 will need to have separate bores drilled into them for connecting lead wires.

Related Product