Product Information

CPU Models Specifications

CPU Models

[Specifications]

ModelRated torque [N・m]MisalignmentMax. rotation speed [min-1Torsional stiffness [N・m/rad]Moment of inertia [kg・m2Mass [kg]
Parallel [mm]Angular [°]
CPU-26-A2.20.3440006003.57×10-60.04
CPU-36-A100.44350013501.64×10-50.09
CPU-46-A250.54300016505.33×10-50.19

*Max. rotation speed does not take into account dynamic balance.

*The moment of Inertia and mass are measured for the maximum bore diameter.

[Dimensions]

Unit [mm]
Modeld1, d2DELL1L2MA
Min.Max.
CPU-26-A612260.336124M39
CPU-36-A818360.344154.75M413
CPU-46-A1022460.354186.5M516

*Insert the shaft to at least the dimension L1. (Note that the shaft cannot go all the way through.)

*The recommended processing tolerance for paired mounting shafts is the h7 class.

[Standard bore diameter]

ModelStandard bore diameters d1, d2 [mm]
66.357899.52510111214151618192022
CPU-26-A
CPU-36-A
CPU-46-A

*Bore diameters between the minimum and maximums shown in the dimensions table are compatible, but bore diameters other than those shown in the above table require a separate bore drilling charge.

Related Product